User manual WHIRLPOOL AKR 976/01 WH INSTRUCTION FOR USE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL AKR 976/01 WH. We hope that this WHIRLPOOL AKR 976/01 WH user guide will be useful to you.
Lastmanuals help download the user guide WHIRLPOOL AKR 976/01 WH.
You may also download the following manuals related to this product:
WHIRLPOOL AKR 976/01 WH PROGRAM CHART (209 ko)
WHIRLPOOL AKR 976/01 WH CUADRO DE MANDOS (209 ko)
Manual abstract: user guide WHIRLPOOL AKR 976/01 WHINSTRUCTION FOR USE
Detailed instructions for use are in the User's Guide.
[. . . ] • • Make sure the hood has not been damaged during transportation. Installation and connection to the mains and exhaust ducts must be carried out by a qualified technician, in accordance with the manufacturer's instructions and local safety regulations.
PROTECTING THE ENVIRONMENT
1. Packaging The packaging is marked with the recycling symbol, signifying that it can be 100% recycled . [. . . ] If the hood is used together with non-electrically powered appliances, ambient negative pressure must not exceed 4 pa (4 x 10-5 bar). Declaration of conformity This appliance has been designed, built and marketed in compliance with: - the safety requirements of the “Low Voltage” EEC Directive 73/23; - the protection requirements of the “EMC” EEC Directive 89/336 amended by EEC Directive 93/68.
75004Agb. fm5 Page 9 Tuesday, March 27, 2001 10:55 AM
HOW TO USE THE HOOD
Switch on the hood a few minutes before starting to cook and leave it running for at least 5 minutes after you have finished. Turn the speed selector to the required speed setting according to the quantity of fumes and steam to be extracted. Close the steam deflector (where fitted).
CARE AND MAINTENANCE
Always disconnect the hood by switching off the electrical power supply before cleaning or carrying out maintenance.
Grease filter • The sponge grease filter should be washed in hot soapy water once a month (soak for 1-2 hours, do not wring. • The grease filter paper should be replaced at least once a month. • Grease filter paper with indicator should be replaced at least every two months or whenever the colour becomes visible through the holes of the grille. This colour should not be visible through the grille holes when the filter is installed. • The metal grease filter has an unlimited life and should be washed once a month by hand or in a dishwasher (60°C) with appropriate detergents. Whenever cleaning or replacing the grease filters, clean all other exposed parts of the hood. Carbon filter (“Air recirculation mode”, see following page) The carbon filter cannot be washed or regenerated. Replace the carbon filter (normal usage) every 6 months (Rectangular carbon filter) every 4 months (Circular carbon filter) Replacing the bulbs 1. Remove the burnt-out bulb and replace it with a new one of the same wattage. Cleaning the hood Use a soft cloth with methylated spirits or a mild liquid detergent. Failure to observe the instructions for cleaning the appliance and replacing or washing the filters may cause a fire.
Hood does not work: • Is the electrical power supply switched on?Never try to carry out any repair yourself other than fixing the above-mentioned problems.
75004Agb. fm5 Page 10 Tuesday, March 27, 2001 10:55 AM
AFTER SALES SERVICE
Before calling After Sales Service: 1. Check to see if you can fix the problem yourself (see “Troubleshooting guide”). Switch off the hood for a few minutes and re-start it to see if the problem has cleared itself. • • • The service code (number below the word SERVICE on the rating plate inside the hood behind the grease filter).
Your full address. [. . . ] If the plug is provided, close off the upper exhaust hole.
Before connecting the hood, make sure the voltage indicated on the rating plate corresponds to the voltage in your home. For GB this appliance is supplied without a plug and is intended for direct connection to fixed wiring in accordance with national wiring regulations. An all-pole disconnection switch with a minimum contact separation of 3 mm must be included in the fixed wiring in an easily accessible position. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AKR 976/01 WH
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AKR 976/01 WH will begin.