User manual WHIRLPOOL AKZ 209/AL/01 INSTALLATION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL AKZ 209/AL/01. We hope that this WHIRLPOOL AKZ 209/AL/01 user guide will be useful to you.
Lastmanuals help download the user guide WHIRLPOOL AKZ 209/AL/01.
You may also download the following manuals related to this product:
WHIRLPOOL AKZ 209/AL/01 PROGRAM CHART (212 ko)
WHIRLPOOL AKZ 209/AL/01 SCHEDA PROGRAMMI (213 ko)
WHIRLPOOL AKZ 209/AL/01 INSTRUCTION FOR USE (2135 ko)
Manual abstract: user guide WHIRLPOOL AKZ 209/AL/01INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] 10200149aGB. fm Page 2 Monday, September 5, 2005 2:24 PM
INSTALLING THE BUILT-IN / UNDER THE COUNTER COLUMN OVEN
Important: Disconnect the oven from the mains before carrying out any installation work or servicing. • Installation must be carried out by a qualified technician in accordance with the manufacturer's instructions and in compliance with local regulations. [. . . ] • After the oven has been installed, the electrical components must be inaccessible.
Connecting the oven to the power supply
• Make sure that the voltage indicated on the rating plate is the same as the mains voltage. The rating plate is on the front edge of the oven (visible when the door is open). • If the oven does not have a power supply cable proceed as follows: 1. Remove the two fastening screws of the terminal box cover located on the bottom part of the oven's rear covering. Remove the cover to gain access to the terminal box and insert the power cable (see table) through the opening located on the bottom of the oven. Connect the cable to the terminal box, tighten the screws as far as they will go and secure it to the cable fastener. Put the cover back on by inserting the two blades in the slots and fasten it with the two screws. Power supply cable table N° of conductors Type of cable 1N+ 2+
Preparing the housing unit
• Kitchen units in contact with the oven must be heat resistant (80 °C min). Carefully remove any shavings or sawdust that could prevent the appliance from running properly. • The dimensions of the oven and unit are shown in figures 1-2-3. • To allow for proper ventilation, an opening should be left at the bottom of the kitchen unit. When installation has been completed, the bottom of the oven must be inaccessible. [. . . ] • Make sure that the plastic spacers (if provided) are positioned correctly in the fastening holes. Then anchor the oven to the housing unit with the screws provided.
Regulations require that the appliance be earthed.
Fig. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AKZ 209/AL/01
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AKZ 209/AL/01 will begin.