User manual WHIRLPOOL AM 3693 INSTRUCTION FOR USE

[. . . ] (The water container light will remain on for about 2 min. even after having emptied the water container. ) DRYING CYCLE SEQUENCE INDICATORS Max. 2. 5 kg Airing Iron dry Drying Airing Anti- The selector knob shows the crease progress of the cycle. 0 End Laundry is aired for 6 minutes without heating. [. . . ] • Recommended drying times are based on spinning speeds of 800, 1000 and 1200 rpm. • For reduced spinning speed a longer drying time should be selected. • Drying times may be longer for towelling and heavier items. - - - - 5019 607 00187 PREPARING THE LAUNDRY 1. Check that all fastenings are closed and that pockets are empty. Place laundry loosely in the drum to make sure it doesn’t become tangled. Sort laundry as follows: A) By care symbols (on the collar or inside seam): Suitable for tumble drying Tumble drying with reduced drying intensity only Do not tumble dry B) By amount and thickness/weight Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e. g. C) By type of fabrics Cotton/linen: Towels, cotton jersey, bed and table linen made of cotton or linen. Synthetics/Easy Care: Blouses, shirts, overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes. D) By drying level • Sort into: iron dry, cupboard dry, etc. • Has the drying time been selected?• Has the Start button been pressed?Lint filter or water container indicator lamp on: • Is the lint filter clean?• Is the water container correctly positioned?Water droplets underneath the dryer: • Is the heat exchanger correctly positioned?• Has any fluff on the heat exchanger seal been wiped away?• Has any fluff on the door seal been wiped away?• Has the water container been positioned correctly? HEAT EXCHANGER Clean the heat exchanger at least every 3 months. Wipe away any lint/fluff from the door seal and interior using a damp cloth. (Please refer to instructions for use) AFTER-SALES SERVICE If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee). [. . . ] (Please refer to instructions for use) AFTER-SALES SERVICE If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee). Please specify: • the nature of the fault. • the service code (the number after the word Service on the adhesive rating plate) on the right hand side when the door is open. • your full address and phone number. 3. [. . . ]