User manual WHIRLPOOL AMD 066 INSTRUCTION FOR USE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL AMD 066. We hope that this WHIRLPOOL AMD 066 user guide will be useful to you.
Lastmanuals help download the user guide WHIRLPOOL AMD 066.
Manual abstract: user guide WHIRLPOOL AMD 066INSTRUCTION FOR USE
Detailed instructions for use are in the User's Guide.
[. . . ] BEFORE USING THE APPLIANCE
To make the most out of your new appliance, please read the user instructions carefully and keep them handy for future consultation.
• The Installation and service/repair must be performed by a qualified technician, in compliance with the producer's instructions and following local safety norms. Do not repair or replace any parts of the appliance unless it is specifically written in the user instructions. • Do not pull the power supply cord to remove it from the socket. Do not twist or press the power supply cord, and make sure it is not broken. [. . . ] Front panel temperature display will change accordingly when turning on the appliance. Factory setting is based on °C
EMERGENCY OPERATION Under emergency situation or when remote control is missing, you can control the unit by pressing the on/off swith located on the indoor unit. • Turn on the appliance: when the unit is off, press this button, it will start up and operate in 6th SENSE mode. • Turn off the appliance: when the unit is on, press this button, the unit will stop working.
Operating condition The protective device maybe trip and stop the appliance in the cases listed below. Outdoor air temperature is over 24°C Outdoor air temperature is below -7°C Room temperature is over 27°C Outdoor air temperature is over *43°C Cooling Room temperature is below 21°C Dehumidifying Room temperature is below 18°C Heating Noise pollution • Install the appliance at a place that can bear its weight in order to operate more quietly • Install the outdoor unit at a place where the air discharged and the operation noise would not disturb your neighbours. • Do not place any obstacles in front of the air outlet of the outdoor unit lest it increases the noise level. Features of protection device Wait at least 3 minutes before restarting the unit after operation stops or changing mode during operation. After connecting to power supply and turning on the appliance immediately, a delay of 20 seconds may occur before it starts to operate. Features of COOLING mode Anti-freezing When the temperature of the indoor heat exchanger drops to 0° or below, compressor will stop working to protect the appliance. Features of HEATING mode Preheating In order to prevent cool air blowing, 2-5 minutes are necessary to preheat the indoor unit at HEATING operation start. Defrosting In HEATING operation the appliance will defrost (de-ice) automatically to raise efficiency. During defrosting, fan stops running and "H1" will display on front panel. After defrosting is completeed, it returns to HEATING mode automatically.
Clean front panel of Indoor Unit 1. Disconnect from the power supply Turn off the appliance first before disconnecting from power supply. Remove the front panel Open the front panel as shown by the arrow (Fig. Pull the slots at the side of the front panel with force to take out the front panel (Fig. Use lukewarm water (below 40°C) to clean if the appliance is very dirty. Note: • Do not use substances such as gasoline or polishing powder to clean the appliance. B Clean Air filter It is necessary to clean the air filter after using it for about 100 hours. Clean the air filter every two weeks if the air conditioner operates in an extremely dusty environment. Disconnect from the power supply Turn off the appliance first before disconnecting from power supply. D) If the filter is very dirty, clean it with a solution of lukewarm water and neutral detergent. Note: • To avoid injury, do not touch the fins of indoor unit with your fingers after removing the filter. [. . . ] NOTE: (depending on the model) It is necessary to remove the cabinet to perform connections with the indoor unit terminal.
Power Connection Cable
Blue Black Brown
Yellow Green Power connection cable
• Outdoor Unit 1) Remove the access door from the unit by loosening the screw. Unscrew the cable clamp, connect the wires to the terminals on the control board individually in accordance with the indoor unit connection. 2) Secure the power connecting cord on the control board with cable clamp. 3) Refit the access door in the original position and tighten the screw. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AMD 066
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AMD 066 will begin.