User manual WHIRLPOOL AWE6517

[. . . ] Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon). Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes 1) i 2) i 95°C only i 60°C only – i i i i i i 1000 2. 5 i Yes 1) i i 2) i i i i 1000 1. 5 i Yes 1) i i 2) i – i i 1000 3. 0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes i i 2) – – i i i 1000 3. 0 1. 0 1. 0 5. 0 5. 0 1. 0 – Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. [. . . ] Increases the cycle time by approximately 20 min. “Eco” button • With a modified temperature profile and a slightly prologned washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved. • Selectable for programmes Cotton 95°C and Synthetics 60°C only. “Intensive Rinse” button • The amount of water is increased to ensure a more intensive rinse. • This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies. “Rinse Hold” button • The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing. • This option is particularly recommended for the “Synthetics”, “Delicates” and “Daily load” programmes. • It is useful if you want to postpone spinning to a later time, or if you want to drain out only. • If you select “Rinse Hold”, do not leave items to soak for too long. • As soon as the appliance stops in the rinse hold, the “Anticrease” lamp of the sequence indicator lights up and the lamp next to the “Start/Pause” button flashes. Terminate the “Rinse Hold” option: • Press the “Start/Pause” button; the programme will terminate automatically with the final spin cycle for the present wash programme. • If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button. “Variable spin” button • Every programme has a predefined spin speed. • Press the button to set another spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during the rinse. The water is drained out only. START DELAY The “Start delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper. • Select programme, spin speed and options. • Press the “Start Delay” button several times to select a delay time of 1, 3, 6, 9 or 12 hours. The corresponding indicator lamp lights up. • Start the programme (see “Progremme Start”). The indication next to the “Start delay” button lights up and goes off when the programme starts. • Once having pressed the “Start/Pause” button, the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication. [. . . ] CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start/Pause” button to pause the programme. Select the new programme, any options and another spin speed if you want. Press the “Start/Pause” button again. [. . . ]