User manual WHIRLPOOL AWG 057 PROGRAM CHART

[. . . ] AWG 057 Cotton Synthetic Delicate Wool Silk GB Rinse + spin Intensive spin Gentle spin Drain is a registered trademark of Whirlpool U. S. A. AWG 057 C o tto n S y n th e ti c 95° 95° 60° 40° D e l i c a te Option s 40° 40° 40° 30° Spin Spe e d Prog ramme s Min 1 2 3 4 A Prewash Cotton Cotton Short 5 Prewash 60° 6 Synthetic 60° 7 Short B intensive spin 50° 8 9 10 11 gentle spin Prewash Delicate Wool Silk On Off Lightly Soiled Quick Wash Rinse Hold On/Off Door lock 3 21 DC S T O P 4 98 1110 rinse and spin C D drain 400 BA 1000 800 S T O P Programme Type of fabric / Degree of soiling Max. [. . . ] Terminates with an intensive spin cycle. Programme for intensive spin cycle, same as the spin cycle in the Cotton programme. Programme for gentle spin cycle, same as the spin cycle in the Wool programme. Alternative way of terminating Synthetic, Delicate or Wool programmes after the “Rinse Hold“. Rinse + spin Intensive spin Gentle spin Drain - - - - For improved garment care, when you select 1000 rpm the actual speed is restricted to 900 rpm. The programme duration figures are approximate values for a programme with maximum temperature but without special options. Printed in Germany 5019 100 03878 76 5 P O T S 600 07. 00 Power and water consumption data: G2P WM1/WH GB Programme selector knob Programme Temperature Maximum load ( kg ) Water Energy Programme duration ( Min. ) 115 95 HOT / COLD FILL INSTALLATION INSTRUCTIONS If you wish to connect hot and cold water supply (fig. 1): i) Fix the red marked inlet hose at the hot water tap and at the inlet valve with the red filter on the rear side of the machine. Fix the other inlet hose at the cold water tap and at the inlet valve with the blue filter on the rear side of the machine. ( °C ) 2 3 Cotton Cotton 95 60 (l) 70 65 ( kWh ) 1. 90 1. 20 5. 0 5. 0 ii) 6 Synthetic Delicate Wool Silk 60 2. 5 60 65 60 70 0. 70 80 9 10 11 40 40 30 1. 5 1. 0 1. 0 0. 60 0. 50 0. 30 45 40 40 MAKE SURE: a) b) The connections are tightly fixed. [. . . ] Connect the two inlet valves present on the rear part of the machine to the Y-piece connector using the relative provided hoses. •) •) MAKE SURE: All connections are tightly fixed. cold fill hot fill cold fill Y-piece inlet valve with blue filter inlet valve with red filter fig. [. . . ]