User manual WHIRLPOOL AWM 593/A PROGRAM CHART

[. . . ] 60° 80 900 1 ❉ Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ 2 Quick wash Max. 60° Normal 2. 5 Quick wash 1. 5 45 Also select the “Prewash” function in the case of a heavily soiled wash. When you select the “Quick wash” function the “Intensive Rinse”, “Energy Save” and “Prewash” functions cannot be selected. [. . . ] This programme provides a gentle spin cycle, the same as the spin cycle in the “Wool” programme. 1 The spin speed is reduced to a maximum of 900 rpm. so as not to damage the laundry. 2 Programme duration figures are valid for a programme with maximum temperature wash but without special options. 5019 100 06873 Consumption data Water Energy GB Energy save For lightly soiled garments the maximum temperature is reduced (from 90° C to 60° C and from 60° C to 40° C) and the cycle duration is longer obtaining the same results. Programme selector knob — — — Programme Thermostat Max. knob Load Options Energy save Rinse hold • Particularly suitable for “Delicate” or “Synthetic” programmes, to reduce garment creasing caused by spinning. • The cycle is stopped and the laundry remains in the last rinse water. Release the button to stop the programme. Quick wash — — — — — Quick wash Prewash • Select in case of heavy soil (e. g. • An additional cycle lasting approx. 15 minutes that is carried out to improve washing results. 1 1 1 1 1 2 2 2 3 4 5 Cotton Cotton Cotton Cotton Cotton Synthetic Synthetic Synthetic Delicate Wool Silk (°C) 95 60 60 40 30 60 40 30 40 40 30 (kg) 5. 0 5. 0 5. 0 5. 0 3. 0 2. 5 2. 5 1. 5 1. 5 1. 0 1. 0 (l) 62 56 56 56 35 60 54 35 60 60 60 (kWh) 1. 80 0. 56 0. 60 0. 55 0. 30 0. 80 0. 40 0. 20 0. 30 0. 30 0. 30 Approx. programme duration (minutes) 115 115 105 105 40 80 70 35 40 35 35 TO RESELECT A PROGRAMME WHEN A CYCLE HAS ALREADY BEGUN: 1. Hold down the “Start” button for at least 5 seconds, until the disk above the programme knob moves; 2. Wait until the programme indicator moves to “STOP”. Hold down the “Start” button for about one second, until the disk above the programme knob moves. • • • Programmes with Prewash last approx. Consumption data was measured in normal conditions in compliance with Standard IEC 60 456. Consumption values in the home may vary with respect to the values in the table depending on the water supply pressure and temperature, the load and the type of laundry washed. PROGRAMME SELECTION PROGRAMME COMPLETION 1. The programme ends when the programme indicator turns to “STOP”. Wait until this happens before opening the door. Set the programme selector knob to “ ”. [. . . ] • SPECIAL FUNCTIONS THAT CAN BE SELECTED: Intensive rinse • Suitable to improve rinsing (e. g. for people with more sensitive skin of for baby linen). • The rinse cycle is longer and the water level increases to improve rinsing. Quick wash / • Suitable for small loads of averagely soiled laundry only. [. . . ]