User manual WHIRLPOOL AWM 6070 INSTRUCTION FOR USE

[. . . ] Hold down the Start button for about one second. This will remove any water remaining in the machine from the manufacturer's test run. ROUTINE WASHES: 1. Sort the laundry according to fabric type and colour and load the machine. Add detergent and any additives required. [. . . ] • The intensive rinse function is especially suitable for areas with particularly soft water, for baby clothes and to help people with allergies. Quick Wash / Rapid button / • Select for quick, economical washes. • Especially suitable for small, lightly soiled loads. Lightly soiled (Half load) • Reduces water consumption, above all during the rinse. • Especially suitable for lightly soiled or small loads (reduce the detergent quantity). Energy save / Eco button • Increases the washing time and reduces the temperature. This reduces energy consumption by about 30% without compromising the excellent results of the wash. 29 PROGRAMME SEQUENCE INDICATOR Indicates the programme selected and the current step in the sequence. “Stop”: Programme end. DOOR LOCK / PROGRAMME END DOOR LOCK The door locks automatically after the programme start until the end of the programme. IMPORTANT: During the first 15 minutes of the Cotton and Synthetic programmes (without Prewash) you can open the door to add items to the wash. This is not possible when the special option “Quick Wash / Rapid” is selected. If the programme selector is set to “0” or the electrical supply is interrupted, the door lock will open after approximately 2 minutes. PROGRAMME END 1. Refit the filter and screw the hose connection to the tap. Unscrew the hose(s) from the machine. Straight water supply hose DETERGENT DRAWER 1 2 2 1. Disengage the drawer by pressing down the release lever and extract it. Remove the inserts (the siphon from the softener compartment, the siphon from the chlorine bleach compartment and the coloured insert for liquid detergent). Reposition the inserts, make sure to push the siphons in until they lock and refit the drawer. 6. Remove the filter from the washing machine with pliers and clean it. Replace the filter and screw the hose connection back on to the machine. Turn on the tap(s) and ensure that the connections are completely water-tight. For machines with Water Stop hose (see figure): 1. Unscrew the Water Stop hose from the tap. Remove only the loose filter and clean it. [. . . ] If you need to add an extension, use a flexible hose of the same type and secure the union with screw-on hose clips. Maximum overall drain hose length: 2. 50 m. Important: Make sure there are no kinks in the drain hose run and take precautions against it falling while the appliance is running. 1 CONNECTION TO THE MAINS • • Observe local utility company regulations. [. . . ]