User manual WHIRLPOOL AWS 61012 PROGRAM CHART

[. . . ] Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry. Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk (keep to care label!), linen, wool and viscose marked as handwashable. At 40°C and 60°C standard cotton programme and most favourable programme in terms of combined water and energy consumption for washing cotton laundry. [. . . ] “Spin” button • Every programme has a predefined spin speed. • Press the button to set different spin speed. • If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only. “DOOR OPEN” INDICATION Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”. FAILURE INDICATIONS In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use. “Water tap closed”: no or not sufficient inlet water. ”Service”: failure or malfunction of an electrical component. ”Clean pump”: waste water is not pumped out. Spin speed on display blinks : unbalance during spinning. PROGRAMME END The “Door open” indicator lights up, and the display shows “End”. After about a quarter of an hour, the washing machine will switch off completely to save energy. 1. Turn the programme selector to the “Off/O” position. 3. Open the door and unload the machine. 4. Leave the door ajar to allow the drum to dry. START DELAY The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option. • Select programme, temperature and options. • Press the “Start delay” button to select the desired delay time up to 23 hours. • Press the “Start/Pause” button. On the display, the start delay symbol and the dot between hours and minutes blink. • The time delay indication disappears when the programme starts and it is replaced by the remaining programme time. [. . . ] • Recommendable for lightly soiled laundry without stains. • Make sure that your detergent is suitable for cold wash temperatures (15 or 20 °C). • Mainly selectable on the lowest temperature step of the programmes. “Intensive rinse” button • More water is added and rinse cycle is prolonged. CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END The “Reset” button cancels a programme before the end. [. . . ]