User manual WHIRLPOOL AWT 7104 PROGRAM CHART

[. . . ] Curtains and delicate clothing, dresses, skirts, shirts and blouses. Textiles made of silk, linen, wool and viscose marked as “handwashable”. If you select “Rinse Hold” do not leave items to soak for too long. Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. [. . . ] • If the spin speed “0” is selected, the final spin is cancelled, but not the intermediate spins. START DELAY The “Start Delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper. • Select programme, temperature and options. • Press the “Start Delay” button several times to select the delay time by 1 to 19 hours; • Press the “Start/Pause” button . The indicator light of the “Start/Pause” button lights up and the lamp of the “Start Delay” button flashes. • The time delay indication disappears when the programme starts and is replaced by the remaining time . • The number of hours preselected can be reduced later by pressing the “Start Delay” button again. To cancel the “Start Delay” option • Turn the programme selector to the “ ” position. • Reselect the desired programme and options and press the “Start/Pause” button . PROGRAMME START Turn on the tap and press the “Start/Pause” button . The indicator light of the “Start/ Pause” button lights up. The indicator lamp shows the sequence reached by the programme. After starting the programme, the programme sequence indicator signals the Wash, Rinse and Spin phases. Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted. LID LOCK For safety reasons, the lid is locked during certain phases of the cycle. At the end of the cycle or during an interruption, the lid unlocks automatically after about 1 minute. END OF WASH CYCLE The remaining time is on “0: 00” and the “End” lamp lights up. Turn the programme selector to the “ ” position. Open the lid and the drum doors and unload the machine. CHANGE THE PROGRAMME OR OPTIONS DURING THE CYCLE 1. Select the new programme using the programme selector. If necessary, select the additional options and the spin speed. The luminous indicator of the “Start/Pause” button flashes. [. . . ] SELECT THE DESIRED OPTION When you select an option authorized by the programme, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible. “Easy Ironing” button • Can be used together with “Cotton” , “Synthetic” and “Daily Mixed” programmes to make ironing easier. • Increases the water quantity in rinsing and the clothes are spun in a softer manner. “Prewash” button • Only for heavily soiled loads (for example sand, granular dirt). “Intensive Rinse” button • The amount of water is increased to ensure a more intensive rinse. [. . . ]