User manual WHIRLPOOL CW 492 B INSTRUCTION FOR USE

[. . . ] Only after the START button has switched off: Press the ON / OFF button. Warning: When the door is opened steam comes out!Unload the appliance, starting from the lower rack. Switch off the appliance Turn off the water tap, unload the racks Dishwasher loading instructions and racks provided Upper rack: Multi-purpose support (A): 1) Depending on the position, for longhandles utensils, cups and glasses. [. . . ] May be used in three different positions. Crockery holders (B): Depending on the position, for example plates, cups and long-stemmed glasses. Revolving glass support (C): 2) Depending on the position, for example small or long-stemmed glasses. Carving forks, knives) must be arranged with the sharp end facing in towards the appliance. Depending on the model Half Load: Load the upper rack (see description of Options). Place the cutlery basket (D) in the upper rack. Rack height adjustment (also when loaded): • Lower adjustment: pull out the two rack handles outwards (E) and lower the rack. €¢ Upper adjustment: pull the two handles (E) upwards until the rack clicks into place (Factory setting). Removing the top rack to provide clearance for large items of crockery in the bottom rack: Open the rack guide retainers (F) on the right and left and remove the top rack. €¢ Remove any impurities obstructing the water flow *. If crockery is not perfectly clean • The water jet does not reach the crockery. €¢ Depending on the material, if necessary use a detergent with a greater whitening power. Opaque glasses/ glasses • Cannot be washed in the dishwasher. Not sparkling Rust on cutlery Identifying appliance faults • Not made of stainless steel. €¢ Ensure the filter assembly is not clogged and that there is no interruption to the water supply (if necessary, clean the filters *). Press the START button for 2 seconds, until the START indicator lamp switches off. Select a new programme and press the Start button again. If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). [. . . ] If after carrying out the above checks the malfunction persists or appears again, turn the appliance off and turn off the water supply tap, then call our After-Sales Service (see guarantee). Before contacting our After-Sales Service, take note of the following: • The nature of the fault • The appliance type and model • The service code (the number indicated on the adhesive rating plate) inside the door on the right-hand side. Before using the dishwasher, read the user instructions!ADG 6560 Quick Reference Guide GB Indicators Programme selector knob Add regeneration salt Only add regeneration salt immediately before starting a wash programme. [. . . ]