User manual WHIRLPOOL GCI3061XB

[. . . ] For questions about features, operation/performance, parts, accessories or service, call: 1-800-253-1301 or visit our website at www. Com In Canada, for assistance, installation or service, call 1-800-807-6777 or visit our website at www. Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. [. . . ] Touch the surface cooking area OFF keypad. If the system cannot recognize the pan, or if the pan has been removed from the surface cooking area, the "replace pan" animation appears in the cooking area display as a reminder. If the pan is not placed within 30 seconds, the zone(s) will switch Off. Touch ON/OFF to turn off desired surface cooking area. Touch POWER to turn off the cooktop when finished. If Control Lock is activated when power to the cooktop is off, the cooktop is locked out, and the surface cooking areas cannot be turned on by the cooktop touch controls. If Control Lock is activated when power to the cooktop is on, all keypads are locked out except for the Power and On/Off keypads. to Lock Cooktop: Touch and hold the CONTROL LOCK keypad for 3 seconds. After 3 seconds, a tone will sound and the indicator light above the Control Lock keypad will light, indicating that the cooktop controls are in the lockout position. If the cooktop is in use when Control Lock is activated, cooking will proceed as normal and any timers that have been set will continue their countdown. Valid pad press Slider is moved to "0" power level Slider is moved to "Boost" power level Boiling is reached Invalid pad press End of Timer cycle Cleaning off the induction cooktop before and after each use will help keep it free from stains and provide the most even heating. Dropping a heavy or hard object onto the cooktop could crack the cooktop. This function allows you to increase the heat setting level above the maximum heat setting 9 for 10 minutes or less. NOTE: Performance Boost function is available on only the left rear surface cooking area. If you attempt to use the Performance Boost function on elements that do not have the feature, 2 beeps will sound, and the power level will remain the same. Check that the left rear surface cooking area has been selected. After 10 minutes, the "P" will no longer be visible in the display, and the Performance boost function will no longer be active. The surface cooking area turns back to heat setting level 9. NOTE: The Performance boost function may automatically be deactivated to keep the internal electronic components of the cooktop from becoming too hot. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed. For foods containing sugar in any form, clean up all spills and soils as soon as possible. Allow the cooktop to cool down slightly. [. . . ] Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty coverage. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is contrary to published user or operator instructions and/or installation instructions. [. . . ]