User manual WHIRLPOOL KSDX 2910 INSTRUCTION FOR USE

[. . . ] • The warming drawer is only intended for domestic use, for heating food or dishes (depending on the model). The Manufacturer declines any liability for improper use or incorrect setting of the controls. • Any repairs or adjustments must be carried out exclusively by a qualified technician. • Make sure the appliance is securely fixed to the cabinet with the special screws supplied. [. . . ] Fitting and installation of this appliance must only be carried out by qualified personnel who guarantee that the requirements for safe use are met. Important: The coffee machine or the combined microwave oven, of size according to the figure on the next page and same brand, can be installed on top of the 140 drawer. For installation, carefully follow the instructions given in the handbooks supplied with the coffee machine and the combined microwave oven. Recess measurements The dimensions of the recess are obtained from the size of the dish warmer plus the size of the appliance combined with it. All measurements are given in mm. 6 Fitting the appliance (depending on the model) Height 140 mm Height 290 mm 7 Electrical connection Contact a qualified technician to carry out the appliance electrical connection. Important: Before connecting the drawer to the domestic power supply to check its operation, always make sure the drawer power cable is correctly fitted and NOT squashed or caught under or behind the drawer or a combined appliance. Important: Power cable replacement must be made with a cable having the same characteristics as that supplied by the Manufacturer (type H05RRF, 3x1 mm2 or higher) and carried out by the AfterSales Service or a qualified technician. Before connecting the appliance to the power supply, make sure that the technical specifications (voltage: V and frequency: Hz) given on the rating plate match those of the power mains. In case of doubt, contact a qualified technician. If the plug is removed from the power cable, contact a qualified technician for fitting and connecting the appliance. Contact an electrician aware of the local regulations and the electricity company's regulations, ensuring that the work is carried out in compliance with the same. Important: Make sure the appliance is connected to an approved earth wire, to guarantee electrical safety. If necessary, have the system checked by a specialised technician. The Manufacturer declines any liability for injury and damage due to the lack or interruption of the earth wire. Important: The earth connection is compulsory by law. If the appliance is connected to the power supply by means of an extension cord, make sure the cord and connection are insulated against moisture. The appliance is designed to be used only when correctly fitted. In case of contact with live wires or if the electrical and mechanical structure of the appliance is modified, an appliance fault may occur when it is used. If the installation, maintenance or repair works are not carried out correctly, there may be risks for the user. The Manufacturer declines any liability for damage or injury in such cases. During the warranty period, repairs must only be carried out by the authorised technical service, otherwise the warranty right is lost. Installation, repair and cleaning operations must only be carried out after ensuring that the appliance is disconnected from the power supply. [. . . ] approved fuse to BS 1362 type and proceed as follows: 1. Fit replacement 13A fuse into fuse cover. Important: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted. Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug. [. . . ]