User manual WHIRLPOOL LEI 1280 INSTRUCTION FOR USE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual WHIRLPOOL LEI 1280. We hope that this WHIRLPOOL LEI 1280 user guide will be useful to you.

Lastmanuals help download the user guide WHIRLPOOL LEI 1280.


Mode d'emploi WHIRLPOOL LEI 1280
Download

You may also download the following manuals related to this product:

   WHIRLPOOL LEI 1280 PRODUCT FICHE (59 ko)

Manual abstract: user guide WHIRLPOOL LEI 1280INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc. ) or their blends with cotton. Curtains and delicate clothing, dresses, skirts, shirts and blouses. Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk (keep to care label!), linen, wool and viscose marked as handwashable. This programme, at 40°C, is tested and approved by The Woolmark Company for machine- and handwashable wool. [. . . ] When the laundry load is detected or the programme duration is updated, an animation appears on the display. • • “DOOR OPEN” INDICATOR Before starting and after end of a programme, the indicator lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”. Terminate the “Rinse hold” option • • Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). * ** *** Reference programmes for Energy Label. To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. Automatic adaptation of programme duration after detection of wash load. Press the “Start/Pause” button ; the programme will terminate automatically with the final spin cycle for the present wash programme. If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the “Start/ Pause” button to start draining. FAILURE INDICATORS If one of the failure indicators blinks, consult the “Troubleshooting Guide” in your Instructions for Use. “Water tap closed”: no or not sufficient inlet water. “Service”: failure or malfunction of an electrical component. “Clean pump”: waste water is not pumped out. Spin speed on display blinks: unbalance during spinning. “Spin” button • • Every programme has a predefined spin speed; press the button to set another spin speed. If spin speed “0” is selected, the final spinning is cancelled and the water is drained only. However, intermediate spin phases remain during rinse. LOAD LAUNDRY, ADD DETERGENT AND SELECT THE PROGRAMME Load the laundry, close the door and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme and temperature. [. . . ] Recommended for heavily soiled laundry (e. g. Do not use liquid detergent for the main wash when selecting “Prewash”. • • CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START 1. Press the “Start/Pause” button to pause the programme. Select the new programme and, if you want, another spin speed and any options. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL LEI 1280

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL LEI 1280 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag