User manual WHIRLPOOL LPR 856 PROGRAM CHART

[. . . ] LPR 856 GB IE PRODUCT DESCRIPTION SHEET 1. Radiant cooking zone Ø 180, 1700 W Radiant cooking zone Ø 210, 2100 W Radiant cooking zone Ø 145, 1200 W Radiant cooking zone Ø 145, 1200 W Display Important: To avoid permanently damaging the glass-ceramic top, do not use: - Pots with bottoms that are not perfectly flat. [. . . ] The first two cooking steps correspond to the Gentle heat function and the Keep hot functions (if provided). The other selectable cooking settings go from 1 - 10. The highest selectable cooking setting equates to the TURBO setting (if provided). The special functions GENTLE HEAT, KEEP HOT and TURBO HEAT are indicated in the display by a red arrow. All selections are stopped and cancelled by simultaneously pressing the + and - buttons. IMPORTANT: For safety reasons, the hob is equipped with an automatic cut-off function, which, depending on the set power output, switches off the cooking zone at maximum power at the earliest after one hour or after 6 hours at minimum power, if no setting change takes place. The Dual and Fast boil SPECIAL FUNCTIONS of each cooking area can be switched on or off with this button. The appropriate cooking area must be switched on for the special functions to be selected. The following special functions are available (if provided): FAST BOILING FUNCTION With this function the cooking zone is heated to the hottest setting for a specified time for bringing to the boil. It is then automatically switched back to selected cooking setting to continue cooking (e. g. selected high setting 5 + fast boil = 5 min. at the highest setting + then switching back automatically to setting 5). [. . . ] Switches the highest power setting on to bring water to the boil rapidly. KEEP WARM FUNCTION TURBO HEAT For enamelled models, clean the cooktop frame with warm water and neutral solution only. Do not use corrosive and/or abrasive substances which could damage the enamelled surface. [. . . ]