User manual WHIRLPOOL MWD 307 WH INSTRUCTION FOR USE

[. . . ] DO NOT OPERATE THIS APPLIANCE if it has a damaged mains cord or plug, if it is not working properly, or if it has been damaged or dropped. Do not immerse the mains cord or plug in water. Electrical shock, fire or other hazards may result. the oven cavity wall. They prevent grease & food particles from entering the microwave inlet channels. [. . . ] CRISP-PLATE PLACE THE FOOD DIRECTLY ON THE CRISP-PLATE. Always use the Glass turntable as support when using the Crisp-plate. DO NOT PLACE ANY UTENSILS on the Crisp-plate since it will quickly become very hot and is likely to cause damage to the utensil. THE CRISP-PLATE may be preheated before use (max. Always use the Crisp function when preheating the crisp-plate. 5 START PROTECTION / KEY LOCK THIS AUTOMATIC SAFETY FUNCTION IS ACTIVATED ONE MINUTE AFTER the oven has returned to “stand by mode“. (The oven is in “stand by” when the 24-hour clock is displayed or if the clock has not been set, when the display is blank). putting food into it, before the safety lock is released. Else the display will show “DOOR”. COOLING DOWN WHEN A FUNCTION IS FINISHED, the oven may carry out a cooling procedure. After this procedure the oven switches off automatically. THE COOLING PROCEDURE can be interrupted without any harm to the oven by opening the door. KITCHEN TIMER USE THIS FUNCTION when you need a kitchen timer to measure exact time for various purposes such as cooking eggs or letting the dough rise before baking etc.       PRESS THE +/- BUTTONS to set the desired length of the timer. PRESS THE POWER BUTTON repeatedly to set the power to 0 W. THE OVEN AUTOMATICALLY use Microwaves and Grill in order to heat the Crisp-plate. This way the Crisp-plate will rapidly reach its working temperature and begin to brown and crisp the food. IT IS NOT POSSIBLE to change or switch, the Power level or Grill, on/off, when using the Crisp function. ENSURE that the Crisp-plate is correctly placed in the middle of the Glass turntable. THE OVEN AND THE CRISP-PLATE become very hot when using this function. DO NOT PLACE THE HOT CRISP-PLATE on any surface susceptible to heat. BE CAREFUL, NOT TO TOUCH the ceiling beneath the Grill element. USE OVEN MITTENS or the special Crisp handle supplied when removing the hot Crisp-plate. ONLY USE the supplied Crisp plate with this function. Other available Crisp plates on the market will not give the correct result when using this function. 9 GRILL USE THIS FUNCTION TO quickly give a pleasant brown surface to the food.     PRESS THE GRILL BUTTON .   PRESS THE +/- BUTTONS to set the cooking time. PRESSING THE GRILL BUTTON during cooking switches the Grill element on and off. [. . . ] Heavily soiled areas can be cleaned with a scouring sponge and a mild cleanser. ALWAYS let the crisp-plate cool off before cleaning. DO NOT immerse or rinse with water while the crisp-plate is hot. This will scratch the surface. TROUBLE SHOOTING GUIDE IF THE OVEN DOES NOT WORK, do not make a service call until you have made the following checks: The Turntable and turntable support is in place. [. . . ]