User manual WHIRLPOOL PDP 600 PROGRAM CHART

[. . . ] Changing or interrupting the programme during the wash cycle Turn the programme selector to the “ ” position. Select the new programme (with temperature), any options and another spin speed if you want. Press the “Start” button again. If the “On/Off” button is pressed, no detergent has to added. [. . . ] Plastic and rubber components of the machine can be stained by dyes. Make sure that all zips are closed and pockets are empty. Make sure there are no cigarette lighters among the items. To open the door press the button inside the handle and pull. If the child lock is active, deactivate it. For optimal washing results, place items loosely into the washing machine. Close the door. Open the door Load the laundry and close the door Choose and measure out the detergent and additives The type of detergent depends on: The type of fabric (cottons, synthetics, delicates, wool - when washing woollens remember to use a detergent suitable for woollens), the colour, the washing temperature, the degree and type of soiling. Dosage Follow the dosage recommendations on the detergent pack. For the water hardness in your area, you can request information from the water company. Soft water requires less detergent than hard water (refer to the water hardness table in the operating instructions). Switch on the washing machine and select the programme Select the desired special options Switch on the appliance Programme end – Unload the laundry Switch off the appliance To switch on the washing machine, press the “On/Off” button. To change the programme once the wash cycle has started, turn the knob to “ ” and set the new programme. Select an option by pressing the corresponding button. Press the button again to cancel the option. Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically. Open the tap and press the “Start” button. The Start button switches off at the end of the wash cycle. Leave the door ajar to allow the drum to dry out. Black process 45. 0° 150. 0 LPI 80120004GB. fm Page 2 Tuesday, November 2, 2004 5:29 PM Programme table Start Delay Prewash IntensiveMax. rinse speed Spin Detergent and additives Options Programme Care Labels Type of wash Prewash Load kg Fabric Softener Main Wash 90° Cotton Averagely to lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc. For heavily soiled loads the “Prewash“ option can also be selected. 5. 0 L Yes L L L L 600 75°, 60°, 40°, 30° 2. 5 Synthetic 60°, 50°, 40°, 30° Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton. For heavily soiled loads the “Prewash“ option can also be selected. L Yes L L L L 600 Daily 40° Slightly to normally soiled textiles made of cotton and/or synthetics. [. . . ] • The machine is perfectly horizontal with all four feet on ground (see “Installation” in the Instructions Manual). • The transit bolts have been removed. The transit bolts must be removed before the appliance can be used (see “Installation” in the Instructions manual). The appliance has an imbalance detection and correction system. [. . . ]