User manual WHIRLPOOL WAC 8400 PRODUCT FICHE

[. . . ] max. — — — Yes Yes max. Yes max. Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc. ) or their blends with cotton. Curtains and delicate clothing, dresses, skirts, shirts and blouses. Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry. [. . . ] This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool. Textiles made of linen, silk, wool and viscose marked as “handwashable”. Same as the last rinse and the final spin in the “Cotton” programme. Same as spin cycle in the “Cotton” programme. Same as spin cycle in the “Wool” programme. — — — — — — — — — Yes Yes Yes max. 1000 1) Yes Yes — — — — 7. 0 7. 0 1. 0 — — — — — Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. — ❉ 1) = optional / Yes = dosing required. For improved garment care, spin speed is restricted in these programmes. Whirlpool is a registered trademark of Whirlpool USA 5019 301 06462 Black process 45, 0° 150, 0 LPI 30106462GB. fm Page 2 Friday, April 29, 2011 11:01 AM CONSUMPTION DATA Programme Cotton Cotton* Cotton* Cotton Cotton* Cotton rapid Synthetics Synthetics Synthetics Delicates Quick wash Wool Wool Handwash Temperature (°C) 95 60 60 40 40 60 60 40 30 30 30 40 20 40 Load (kg) 7. 0 7. 0 3. 5 7. 0 3. 5 7. 0 3. 0 3. 0 3. 0 1. 5 3. 0 1. 0 1. 0 1. 0 Water (l) 74 54 42 69 42 54 46 42 42 60 48 60 60 45 Energy (kWh) 2. 10 1. 05 0. 85 0. 80 0. 60 1. 19 0. 80 0. 30 0. 30 0. 50 0. 25 0. 55 <0. 10 0. 55 Approx. duration (hrs : min) 2:10 4:00 3:00 2:45 2:30 2:30 1:35 1:16 1:16 0:45 0:30 0:45 0:40 0:40 PROGRAMME START Open the tap and press the “Start/Pause” button . Water and energy consumption data refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. * The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). Reference programmes for Energy Label. 2. Select the new programme and, if you want, any options. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme. CANCEL A RUNNING PROGRAMME BEFORE THE END The “Reset” button before the end. cancels a programme ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. [. . . ] cancels a programme ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. • Turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button blinks. SELECT ANY DESIRED OPTION Push the button of any option desired - the respective indication lights up. [. . . ]