User manual WHIRLPOOL WMT502 PRODUCT FICHE

[. . . ] Same as the last rinse and the final spin in the “Cotton” programme. in this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. 5019 412 10111 CONSUMPTION DATA Programme White Cotton / Hygienic+ Cotton Cotton + Eco** Cotton SuperEco Synthetics Synthetics Delicates Daily load Quick wash Wool Handwash Lingerie Temperature (°C) 95 60 60 40 60 60 40 40 40 30 40 40 30 Load (kg) 5. [. . . ] The indication lamp over the “Start delay” button lights up and goes off when the programme starts. €¢ Once having pressed the “Start/Pause” button, the countdown of the time delay begins. The time delay indication on the display disappears when the programme starts and is replaced by the remaining time. €¢ After the “Start/Pause” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay” button. to cancel the “Start delay” . Before you press the “Start/Pause” button: • Turn the programme selector to another position or press the “Reset” button. After having pressed the “Start/Pause” button: • Press the “Reset” button for at least 3 second. The start delay indicator light goes off. PROGRAMME START Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. prewash cycle increases programme duration by aproximately 20 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference Programme for Energy Label. *** The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. Load the machine, close the drum doors and check that they are properly locked. Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instruction for Use, and close the lid. Turn the programme selector to the desired programme and temperature. The time display shows the duration of the chosen programme (in hours and minutes), and the lamp next to the “Start Pause” button flashes. The indication lamp of the predefined spin speed lights up. [. . . ] Increases the cycle time by approximately 20 min. €¢ Do not use liquid detergent for the main wash when activating the prewash option. €œEasy ironing” button • Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier. €¢ Increases the water quantity and the clothes are spun very gently. [. . . ]