User manual WHISTLER 1743 COMBO

[. . . ] OWNERS MANUAL If you have questions concerning the operation of this Whistler product please call: CuSTOmer SeRVICE 1740/1743 1744/1745/1748 LASER-RADAR 1-800-531-0004 Monday - Friday · 8:00 am - 5:00 pm CT or visit our website www. whistlergroup. com DETECTOR The Whistler Group Corporate Headquarters 13016 N. · Bentonville, AR 72712 Tel (479) 273-6012 · Fax (479) 273-2927 1201 N. · Rogers, AR 72756 Consumer Relations Tel (800) 531-0004 P/N 203331, © 2003 The Whistler Group, Inc. Customer Return Center Please keep the receipt in a safe place. You may register your product online at www. whistlergroup. com. [. . . ] Unit will say "VG-2" and the V/L light will illuminate briefly. If VG-2 detection is already on, the unit will provide a double beep to indicate VG-2 detection is turned off. To turn Voice off/on: Press and hold the Quiet button (greater than 3 seconds) until you hear a double beep then release the Quiet button. If voice alert was already off, the unit will say "CAUTION". Teach/Tutorial Mode Provides simulated alerts for each type of signal. · Press City and Quiet simultaneously and release. Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector within 6 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the 6 hours have expired. The detector will alert you with an 11 12 OPERATION audible and visual warning before it shuts off. Display shows: RADAR ALERTS/VG-2 sages. When Safety Radar is detected the audio alert is geiger counter-like. Example: Note: Not all areas have Safety Warning System transmitters. VG-2 Audio/Visual Alerts Note: You must turn this feature on in option select mode before it will detect the VG-2 Gun. When a VG-2 signal is detected, the detector "hides" its own radiated signal and becomes undetectable by the VG-2. Every 30 seconds, the detector checks for a VG-2 signal. If a VG-2 signal is still present, the unit continues to hide and repeats the VG-2 alert. If no signal is detected, two beeps are provided, indicating an "all clear" condition. During VG-2 Alert X, K, and Ka band signals cannot be received. Alert Priority When two or more signals are received at the same time, the alert priority is: 1. Safety Radar Example: If X band is alerting, then suddenly VG-2 is detected, the VG-2 warning will override the X band alert. Blinking During this warning you can momentarily reset the unit by pressing any button. If the unit has automatically turned itself off, press the Power button to turn the unit back on. You can manually engage the Vehicle Battery Saver Mode by pressing and holding the City button until one beep is heard. RADAR ALERTS Speed Radar Audio/Visual Alerts When X, K or Ka is detected the band ID and signal strength is displayed. [. . . ] Service Under Warranty During the warranty period, defective units will be repaired without charge to the purchaser when returned with a 19 WARRANTY INFORMATION store receipt. You may register your warranty online at www. whistlergroup. com, however, for warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work. Service Out of Warranty Units will be repaired at "out of warranty" service rates when: · The units original warranty has expired. · Dated store receipt is not supplied. [. . . ]