User manual WHITE BROWN BL 538

[. . . ] - Do not leave the blender in water to soak and do not leave water inside it. SPOUT - The spout can be unscrewed from its base and dismantled in two parts, in order to be cleaned. Always place first the liquid ingredients in the bowl, except when the contrary is specified in the recipe. ⷠDice food in small parts of 1". [. . . ] Then, with the machine running, remove the filler cap and add oil slowly and evenly through the feeder cap. ⷠWhen blending ingredients of heavy consistency, it is necessary to use the mixing spoon to help the mixture getting down to the blades. To use the mixing spoon, turn off the motor, remove the cover, move the mixing spoon up and down rapidly along sides of the jug, and push the ingredients from the sides of the jug to the centre. cAUTION : The spout is intended only to pour liquids. Do never try to pour hard or heavy ingredients with spout. TECHNICAL DATA 600 W - 230 ~ 50 Hz MOTOR UNIT Powerful and silent, the motor unit (1) is shaped in strong painted stainless steel. Its power indicator (3) lights when appliance is plugged and ready to be used. Selectors are used to set the motor speed (I medium speed, II high speed), to stop or to operate by short pulses (0/pulse). COVER This cover is constituted of two parts : a self adjusting vinyl cover (8), and a feeder cap (9). The feeder cap is removable for use as a measuring cap and allows addition of other ingredients. Instead of the feeder cap, you can place the hand mixing spoon (11) to mix manually the stuff before serving. MIXING GLASS JUG This jug (7) is graduated for easy measurement and is moulded of heat and cold resistant material. Handle and lip are designed for an easy serving. pOURING TAP The rotary pouring tap (5) is designed to serve precise quantities of liquids. It is suitable for example to serve only a glass of cocktail. The power unit (1) of your appliance fits with simple assembling base (12) or assembling base with tap (4). Each assembling base is to be used with its bowl : simple base together with glass grinder, base with tap together with mixing bowl. Place the assembling base on a flat level surface, blades upward, taking care not to touch them with hands. Make the notch match on each part, then turn clockwise to lock. 1 ­ Motor unit 2 ­ On, Off, speeds and pulse selectors 3 ­ Power light indicator 4 ­ Assembling base with tap 5 ­ Pouring tap 6 ­ Blades of base with tap 7 ­ Mixing bowl 8 ­ Vinyl cover 9 ­ Cap 10 ­ Handle 11 ­ Hand mixing spoon 12 ­ Simple assembling base 13 ­ Blades of simple base 14 ­ Glass grinder 15 ­ Ice cream moulds Do not place the appliance on or near sources of heat. Do not use outdoors and store in a dry environment. Unplug the appliance before cleaning, ranging or replacement of any pieces. [. . . ] Never take out or change any part or accessory during operations. Do never place cutting blades on base without jug properly attached. Always shut the outlet cover when operating and when not using the blender. If the container should turn when the motor is switched On, switch off immediately and tighten jar in threaded container bottom. [. . . ]