User manual WHITE BROWN DB 713

[. . . ] â· Only use this appliance for domestic purposes and in the way indicated in these instructions. â· Never immerse the product in water or any other liquid for any reasons. Do not use the appliance outside and always place it in a dry environment. â· Do not use if you have wet hands. [. . . ] Can be restored by holding the iron a few cm above the fabric whilst pressing the steam button. â· Carpets or rugs can be restored to new, eliminating marks left by furniture resting on them, by penetrating the flattened area with steam and then brushing lightly. â· Never rest or use the iron on zips, hooks, rings etc as this could scratch the plate. â· The surface of the sole must be kept clean. To clean, wipe the cold surface with a damp cloth. Never treat the iron with descaling agent. â· After use, always wait for the iron to cool before putting it away. Keep attention not to let the cables touch the hot parts of the appliance. â· If the appliance is not used for a long time it is suggested, before ironing, to press the steam supply button for 30 seconds putting the iron on a cloth ; this to clean the internal tubes of the appliance. After ironing water left in the boiler need not to be emptied. â· Divide garments according to the required ironing temperature, starting with those which require the coolest temperature. â· Silk can be dry ironed on the wrong side. â· Wool, cotton and fine linen fabrics can be steam ironed on the wrong side or alternatively on the right side with a thin layer of material between the fabric to be ironed and the iron to avoid "shine". starched fabrics require a higher humidity. Iron white and light fabrics on the right side and dark colours on the wrong side. Iron embroidery on the wrong side to make it stand out. â· Linen can be steam ironed, steaming abundantly and ironing dark fabrics only on the wrong side to avoid "shine". Each time you use the iron (and when you use it for the first time) or if you have not used steam for several minutes, push the steam button repeatedly. This eliminates cold water from the steam circuit. Before steam ironing, make sure the fabric is suitable for this type of ironing. Before filling the tank, make sure the appliance is unplugged from the mains. â· Remove the boiler cap (9) and fill the tank with water. [. . . ] Wait for the appliance to be completely cooled. Empty the boiler above the sink or a container. â· Use a special descaling product, according to the using tips. Then empty the boiler and rinse 4 times before a next use. [. . . ]