User manual WHITE BROWN HR 549

[. . . ] Plug the power supply cable into a mains socket and switch on the mincer. Slowly feed the meat pieces into the feed funnel and push down with the feedstick (fig. Do not apply excessive force when pushing down the feedstick. [. . . ] Hold the mincer head with one hand and insert the screw plug (B) into the side hole of the motor block and turn clockwise (fig 1). Insert the worm with the long end into the mincer head and turn slightly until it is securely seated in the motor block (fig. Mount the knife on the worm in the illustrated manner : the rounded side of the knife must face the worm, the smooth side is in contact with the mincer plate (fig. Meat will not be minced if the knife is mounted the wrong way. The two arresting pins must lock precisely into the corresponding notches (fig. Press the feed pan firmly onto the mincer. If the cord or the plug is getting more and more hot, contact a qualified electrician. All interventions made by a non-qualified person can be dangerous ; in this case guarantee conditions would cancel. Always keep fingers and accessories out of the feed pan in order to prevent any risks of injuries or any damages on the appliance. The mincer must only be used to process meat and vegetables. Only operate the mincer after it has been carefully assembled. Carry the appliance with both hands by the motor block ­ never by the filling pan or the mincer. Never push the food into the feeding funnel with your fingers. Always use the feedstick for this purpose. [. . . ] Never pull the cord to unplug or move the appliance. Unplug the appliance before cleaning or changing any parts of it or when it's not in use. Always switch off the appliance before unplugging. [. . . ]