User manual WINDMERE I-335

[. . . ] Or, call the appropriate toll-free number listed on the cover of this manual. Incorrect reassembly can cause a risk of electric shock when the iron is used. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board. [. . . ] GETTING STARTED remove any labels, stickers or tags attached to the body or soleplate of the iron. note: Use ordinary tap water for ironing. Do not use water processed through a water softening system. Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (A). Temperature-ready light glows when iron has reached set temperature setting. Tip: if unsure of a garment's fabric, test a small area (on an inside seam or hem) before ironing. Move the dry/steam selector to the desired steam level (B). Turn the fabric-select dial to appropriate setting (between 4 and 6) for your fabric (C). See fabric guide on the heel rest and read garment's label to help you determine fabric type. The temperature-ready light glows until it reaches the appropriate temperature. It then cycles on and off during ironing. When finished ironing, turn the fabric-select dial to lowest heat C setting, move the selector to and unplug the iron. Stand the a b iron on its heel rest and allow it to cool off. Important: Always stand the iron on its heel rest when powered on but not in use. With water tank filled to the MAX mark, turn the fabric-select dial to at least setting 4 and wait for the temperature-ready light to go off. When finished ironing, turn the fabric-select dial to lowest heat setting, move the dry/steam selector to and unplug the iron. Wipe the soleplate and outer surfaces with a soft cloth dampened with water. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch or discolor the iron. After cleaning, steam iron over an old cloth to remove any residue from the steam vents. Stand the iron on its heel rest and allow it to cool off. Store vertically on its heel rest to prevent water leaking from the soleplate, or you can empty the water tank. IRONING WITH SPRAY use to dampen tough wrinkles at any setting (E). [. . . ] One-Year Limited Warranty (Applies only in the United States and Canada) What does it cover? â· Any defect in material or workmanship; provided; however, Applica's liability will not exceed the purchase price of the product. Provide you with a reasonably similar replacement product that is either new or factory refurbished. â· Save your receipt as proof of the date of sale. [. . . ]