User manual WINNY ES 534

[. . . ] EN IMPORTANT: Before starting the motor for the first time, carefully read the instructions as set out in the engine handbook. Maximum noise and vibration levels For model . 414 464 534 Operator ear noise pressure level (according to regulation 81/1051/EEC) . Acoustic power level according to directive 2000/14/EC 2. [. . . ] Do not leave containers with grass cuttings in rooms. 5) Check the stone-guard and grass-catcher frequently for wear and deterioration. 6) If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. 7) Wear strong work gloves when removing and reassembling the blade. For safety reasons, these jobs are best carried out at a specialized centre. 9) For safety reasons, never use the machine when it has worn or damaged parts. Parts are to be replaced and not repaired. Parts that are not of the same quality can damage the equipment and impair your safety. 1) Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. 2) Mow only in daylight or good artificial light. 3) If possible , avoid operating the equipment in wet grass. 4) Always be sure of your footing on slopes. 5) Walk, never run and do not allow yourself to be pulled along by the lawnmower. 6) Mow across the face of slopes, never up and down. 7) Exercise extreme caution when changing direction on slopes. 8) Do not mow on slopes of more than 20°. 9) Exercise extreme caution when pulling the lawnmower towards you. 10) Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed. 1) Whenever the machine is to be handled, raised, transported or tilted you must: ­ wear strong working gloves; ­ grasp the machine at the points that offer a safe grip, taking account of the weight and its distribution. ­ use an appropriate number of people for the weight of the machine and the characteristics of the vehicle or the place where it has to be placed or collected. For instructions regarding the engine and the battery (if supplied), read the relevant manuals. NOTE - The number which precedes each paragraph links the references in the text to the respective figures (listed on the pages 2 - 3). [. . . ] By loosening the knobs (2) the handle can be set at two different heights. Eliminate the washers (2) and fit the plate (1) onto the top of the grass-catcher (3) so that it clicks into place. Assemble the two parts of the grass-catcher (3) and (4), making sure that the hooks are fully locked into place and fasten them using the screws supplied (5). Fit the edge of the cloth (19) right into the groove of the plastic part (13), starting 5-7 mm from the ends. [. . . ]