User manual WOXTER I-CUBE 760 DATASHEET

[. . . ] This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] NOTE: This item is functional only when the {ZOOM MODE} setting is set to {CUSTOM}. AUTO SETUP Use this function to let the display automatically optimize the display of VGA input image. NOTE: This item is functional for VGA input only. AUTO ADJUST Choose to let the display detect and display available signal sources automatically. {ON} - Set the display to display the image automatically once a signal is connected. {OFF} - Once a signal is connected, it can only be selected manually. H POSITION Press the [ ] button to move the image to the right, or [ ] to move the image to the left. ZOOM Expands the horizontal and vertical sizes of the image simultaneously. H ZOOM Expands the horizontal size of the image only. 16 V ZOOM Expands the vertical size of the image only. 4. 2. 4. PIP menu PIP H POSITION Moves the horizontal position of the image left or right. V POSITION Moves the vertical position of the image up or down. PIP 1 2 3 PIP MODE PIP SIZE PIP AUDIO PIP H POSITION PIP V POSITION SUB INPUT PIP RESET OFF SMALL MAIN AUDIO 100 0 VIDEO INPUT RESOLUTION Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly. NOTE: This item is functional for VGA input only. The options are: {1024x768 / 1280x768 / 1360x768} {1400x1050 / 1680x1050} {1600x1200 / 1920x1200} {Auto}: Determines the resolution automatically. The selected settings will become effective after turning off the power and turn it on again. The days in a week for the display to activate. Which input source the display will use for each scheduled activation period. NOTE: You should set up current date and time in {DATE AND TIME} menu before using this function. Press [SET] button to enter the submenu. Select or leave an empty "__" for both the hour and minute slot if you do not want to use this power-on or power-off schedule. 3 INPUT-SOURCE selection: Press [ ] or [ ] button to select an input source. If no input source is selected, the input source will remain the same as last selected. DATE schedule: Press [ ] button to select which day in a week this schedule item will be take effect, and then press the [SET] button. 4 4. For more schedule settings, press [EXIT] button and then repeat the steps above. A check mark in the box next to the number of the schedule item indicates that the selected schedule is in effect. NOTES: The {EVERY DAY} selection in a schedule item takes priority over the other weekly schedules. If the schedule overlap, the scheduled power-on time takes priority over scheduled power-off time. If there are two schedule items programmed for the same time, the highest numbered schedule takes priority. [. . . ] You will need to provide your product's serial number, so please record the product information in the space provided below on your purchase for your future use. Please retain your receipt of proof of purchase to support your warranty claim. For Your Records Product Name: ________________________ Document Number: _____________________ Purchase Date: ________________________ Model Number: _____________________________ Serial Number: _____________________________ Extended Warranty Purchase?_____________(Y/N) If so, what date does warranty expire? [. . . ]