User manual X10 IR7243W

[. . . ] The Infra-Red Mini-Controller lets you remotely control lights and appliances from the control of your armchair. Place it near your home entertainment system or by your bedside as you like. With your Infrared Universal Remote Control (X10 compatible), or by pressing the buttons on your Mini-Controller, you can turn off your appliances or lights around your home without getting out of your easy chair. [. . . ] Note: For PRONTO remote control: If the IR7243 is set to house code P, then all commands coming from a Pronto remote control will be converted to powerline using the house code you set in the house code screen of a Pronto remote. When you press a front panel key of the IR7243, the housecode P will be transmitted. To control X10 device you need to enter the Home Automation code in your X-10 remote. You can find this code in the Code Book of your remote control. To enter the code, please refer to the user guide of your remote control (same procedure as the setting of a VCR or SAT . Note that you need to dedicate one mode key of your remote control to this home automation code. Press the mode key dedicated to Home Automation on your remote control. Press Channel up/ down to turn it on/off on your remote control. Press the mode key dedicated to Home Automation on your remote control. Note: To control modules with unit codes higher than 9, on most X10 remote control, you can use the following keys : - "10", press the 0 key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-) - "11", press the A. B key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-) (or the record) key and then on (Chan+), off (Chan-), Bright - "12", press the (Vol+) or Dim (Vol-) - "13", press the key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-) - "14", press the key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-) - "15", press the key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-) - "16", press the --/- key and then on (Chan+), off (Chan-), bright (Vol+) or dim (Vol-) Press the mode key dedicated to Home Automation on your remote control. Press the Power key of your remote control. Press the mode key dedicated to Home Automation on your remote control. Press the Mute key of your remote control. Press and release the on or off side of one of the four number keys corresponding to the Unit Code set on the Module(s) to be controlled. To change the light intensity : press on DIM/BRIGTH button (note : this feature works if your selected lamp is plugged into a "lamp" module) 3. [. . . ] Avec votre Mini-Contrôleur Infra-Rouge, vous pouvez commander à distance tous les appareils électriques de votre maison. Om modules te bedienen met UnitCodes hoger dan 9, kunt u op de meeste afstandsbedieningen de volgende toetsen gebruiken: - "10", druk op de 0 toets gevolgd door on (Chan+), off (Chan-), bright (Vol+) of dim (Vol-) - "11", druk op de A. B toets gevolgd door on (Chan+), off (Chan-), bright (Vol+) of dim (Vol-) - "12", druk op de (of de record) toets gevolgd door on (Chan+), off (Chan-), bright (Vol+) of Dim (Vol-) - "15", druk op de key, gevolgd door on(Chan+), off (Chan-), bright (Vol+) of dim (Vol-) - "16", druk op de --/- toets, gevolgd door on (Chan+), off (Chan-), bright (Vol+) of dim (Vol-) [. . . ]