User manual X10 LM12E DATASHEET

[. . . ] Lamp Module 230VAC - 50 Hz - 300W LOAD RATING Key features · On/Off and dimmer control of incandescent lighting. [. . . ] The connected lamp can still be switched on and off locally. The dimmer function, however, is by an X10 remote control. The dimmer module can be used at any wall outlet in the house with incandescent lamps between 40W and 300W. As the dimmer is simply inserted into wall outlets like an ordinary plug, there is no installation necessary. Just adjust the settings on the front side to the desired device address (e. g. F9) and note this address down in a list. [. . . ] Or alternatively, by individual unit control using "On", "Off", "Bright" and "Dim". Technical data · Supply voltage: 230V ±10% 50 Hz · Supply current : = 20 mA capacitive · Making capacity: 60 to 300W (incandescent + 12 V halogen lamps only) · Regulating time: 4, 4 sec ± 0, 2sec from fully on to off · EMC: EN 50081-1, EN 50082-1, EN 6100- 3-2, EN 61000-3-3, EN 60555-2 · Electrical safety: according to EN 60950 and EN 60065 · Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz · Input impedance: = 55 Ohms (L - N) at 120 kHz · Ambient temperature: - 10° C to + 50° C (operation) - 20° C to + 70° C (storage) · Dimensions: 52 x 122 x 33 mm (width x height x depth without plug) [. . . ]