User manual X10 VK30CT DATASHEET

[. . . ] Video Sender with Cable Tuner Key Features · View cable TV in any other room in the house, with no wires. [. . . ] In the past, this meant installing a coaxial cable from the nearest outlet - invariably a long distance, or a difficult installation, or with a resulting poor picture. One solution is to use a standard Video Sender connected to your main TV. However, the standard Video Sender only transmits the same channel as the main TV. If two people wish to watch different programmes, then the standard Video Sender isn't your solution. You want the Video Sender with Cable Tuner. With X10's Video Sender with Cable tuner, the extra TV can be tuned to any programme independent of the programme watched on the main TV. This is made easy by the remote control supplied with the kit. In addition, the standard features of the Video Sender are also available as follows : · The transmitter unit takes audio and video signals from the satellite set top box, video disc player, DVD, or VCR and converts them to RF. [. . . ] · UHF socket · Four position channel selector switch · ON / OFF switch Specifications · AC supply: 230V/50 Hz · Approvals: CE Mark, ETS 300220, ETS 300440 · Channels: 4 TRANSMITTER · RF output: 50, 000 µV/m @ 3m · Modulation method: FM (Video & Audio) · Video input level: 1 v p-p (typ) · Audio input level: 1 v p-p (typ) · Video input impedance: 75 ohms · Audio input impedance: 600 ohms · RF input: 433. 92MHz · Operating range: 100 m open field RECEIVER Components · 2. 4GHz transmitter unit with integrated cable tuner & 433MHz receiver · 2. 4GHz receiver unit with 433 MHz transmitter · Remote control for setting-up the cable tuner and selecting programmes · 2 cables with RCA-SCART plugs · IR extender cable with 3 IR eyes · Video output level: 1 v p-p (typ) · Audio output level: 1 v p-p (typ) · RF output: 433, 92 MHz 1 mW typical @ 3m [. . . ]