User manual XACT REPLAY XS082 INSTRUCTION MANUAL

[. . . ] Such modifications could void the user's authority to operate the equipment. Note: Use only the appropriate XACT accessories or input devices with your receiver. Use only the AC Power Adapter that is provided with the kit. It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty. COPYRIGHT / TRADEMARKS No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. "Sirius" and Sirius dog logo and related marks are registered trademarks of Sirius Satellite Radio Inc. [. . . ] It is important that you do not modify it in any way as this may result in damage to your equipment and void the warranty. 1. Satellite Radio Receiver onto the mounting tab of the Home Stand until it engages. Place the Home Mount in an appropriate location on a table, desk, shelf, etc. . . Connect the DC Power, antenna and audio (if required) to the appropriate jacks. (figure 3). 2. 3. 6 Antenna Aiming via the Receiver To enter the Menu Options page of the Receiver, press the MENU button. The "Menu Options" list will be displayed. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight the "Signal Indicator" option and press the Select button. If a selection is not made within 10 seconds, the Receiver will exit the menu options screen, and revert to the last active display mode. Signal Indicator The Signal Indicator display screen provides a visual display of the strength of the SIRIUS signal from the satellite and terrestrial (ground) transmitters. 1. Two 10 segment horizontal bar graphs will be displayed with a "-" sign to the left and a "+" sign to the right. SAT indicates the satellite signal strength while TER indicates the terrestrial signal strength, if a terrestrial signal is available. To exit the Signal Indicator menu, press the MENU button. 7 Sirius Satellite Map Due to the paths of the Sirius satellites over the US, the best location for the antenna in your home depends on where you live. Use the map below as a general placement guideline. Area 1 : Place the antenna at an EAST facing window. Area 2 : Place the antenna OUTSIDE, away from any overhead obstructions. Area 3 : Place the antenna at a NORTH Area 4 : Place the antenna at a WEST - or NORTH - facing window. Area 5 : Place the antenna at a NORTH - facing window. Area 6 : Place the antenna at a NORTH - or EAST - facing window. 8 PROBLEM SOLVING Problem Solving Section For your assistance, we have listed a few common problems below. The XACT Sirius Satellite Radio Receiver does not work. Make sure you have contacted Sirius to activate your Sirius Satellite Radio subscription 1-888-539-SIRIUS (7474). I have no sound from my XACT Sirius Satellite Radio Receiver. Check the audio cables and make sure they are plugged in correctly. Check the FM Transmitter Setting and make sure that your FM radio is set to the correct channel if used. Makes sure the XACT Sirius Satellite Radio Receiver audio level is turned up. When the satellite signal is lost or blocked, a window appears with the message "Acquiring Signal" and it is displayed until the satellite signal is recovered. When no antenna is detected and the signal is lost, a window appears with the message "Antenna Disconnected" and it is displayed until an antenna is detected and the signal is acquired. [. . . ] Your product will be repaired or replaced if examination by the service center determines the product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier prior to repair. A product received with missing parts or with damage due to abuse, inadequate packing or some other noncompliance with this limited warranty will be returned to you C. O. D. , freight collect. NOTE: A product received which was not made by XACT Communication or which is not defective as determined by our test procedures will not be repaired and will be returned to you C. O. D. , freight collect. To Obtain Warranty Service · Provide proof of the date of purchase within the package. [. . . ]