User manual XACT VISOR XTR3CK INSTRUCTION MANUAL

[. . . ] Instruction Manual Model XTR3CK To activate your XACT Visor Sirius Satellite Radio Receiver or for latest news and questions regarding Sirius Satellite Radio service visit www. sirius. com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www. getxact. com. KEEP MOVING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The Channel # you are currently on and Song Title will scroll on the display. Note: If display information is longer than 16 characters, the display will pause for 2 seconds after the first 16 characters are shown, then scroll the remaining characters. Flip Display Holding the DISPLAY button on the XACT Visor Sirius Satellite Radio Receiver for 2 seconds will flip the display. Tuning to Different Entertainment Categories 1. Press the CATEGORY button to scroll through music and entertainment categories. Each press of the CATEGORY button advances to the next category. Press the Select button inward when the desired category is reached. Tuning to Different Channels in the Selected Category 2. Once you have chosen the desired category, rotate the Channel Up/Down Rotary Dial clockwise or counter clockwise until the desired channel is displayed. Press the Select button inward to tune to the desired channel. Note: If the category or channel is not selected within 5 seconds, the XACT Visor Sirius Satellite Radio Receiver reverts to normal tuning mode. 14 Direct Tuning (Remote Only) Your XACT Visor Sirius Satellite Radio enables you to tune to a selected channel directly. This feature is only available through the Remote Control. 1. Press the DIR button on the Remote Control to activate the Direct Tuning mode. The corresponding window is displayed and asks you to enter the desired channel number (3 digits). The XACT Visor Sirius Satellite Radio Receiver will be tuned to your selected channel. . Presetting Channels Your XACT Visor Sirius Satellite Radio Receiver allows you to preset 36 channels. This design enables you to directly select between 6 different bands of preset channels (identified as A, B, C, D, E and F). Each band contains 6 specific channels (indicated as A-1, A-2, A-3. . . . F-4, F-5 and F-6). Press the BAND button to switch to your desired band (A-F) according to your preference. 3. Once the desired band is set, press and hold the 1, 2, 3, 4, 5, or 6 numerical buttons to store the specific channel. The Channel will now be recorded in memory. Note: If a channel is already recorded into a preset, the new channel will overwrite the old one. 15 Selecting One of the Preset Channels 1. Press the BAND button until the desired band (A-F) is displayed. 2. Press the desired numerical button (1, 2, 3, 4, 5 or 6) a confirmation will display. If the desired band and number is press and does not have a channel stored Preset Empty will be displayed. Preset Tuning Mode Pressing the BAND button for 2 seconds will activate/deactivate the "Preset Tuning Mode" feature. Using the Rotary Channel Dial, you will now scroll only through channels that have been preset using the 1-6 preset buttons in Bands A-F. Pressing the BAND button again for 2 seconds returns the XACT Visor Sirius Satellite Radio Receiver to normal tuning mode. Note: When "Preset Tuning Mode" is activated, the first preset in the current Band will be automatically tuned. If you are already tuned to a preset channel, it will continue playing. 16 MENU OPTIONS SETTINGS The following options are included on the Menu Options list: · Sirius ID · Display · Factory Default · Auto Shutoff · Parental Block · FM Transmitter BASIC SETTING PROCEDURE 1. Rotate the Channel Up/Down Rotary Dial to select a desired menu option. Press the Select button to enter into the selected menu option. Set the menu option to your preference according to the steps described below. To exit the menu option, press the MENU button. Sirius ID 1. [. . . ] When the audio signal is lost the flashing message "Acquiring Signal" is displayed until the signal is recovered. When no antenna is detected and the signal is lost, the flashing message "No Antenna" is displayed until an antenna is detected and the signal is acquired. Reception is weak or the audio has static and is unclear. Change the location of the Antenna making sure it is away from obstructions. 29 WARRANTY Warranty Information XACT Communication One-Year Limited Warranty This limited warranty sets forth all XACT Communication responsibilities regarding your product. [. . . ]