User manual XACT XC1255

[. . . ] Model XC1255 INTEGRATED SPEAKERPHONE WITH CALLER ID ON CALL WAITING* OWNER'S MANUAL INSTALLATION AND OPERATING INSTRUCTIONS PLEASE READ THIS MANUAL CAREFULLY BEFORE USE. For installation information, please see "Getting Started" instructions on page 8 or your separate Quick Start guide. *This feature requires Caller ID with Call Waiting service available from your local phone company. © 2003, 2004 XACT Communication, LLC Visit Us on the Web: www. getxact. com Special Features Congratulations on your selection of a quality XACT Communication Product. With proper care and adherence to the set-up and user instructions in this Owner's Manual, this unit will provide you with years of trouble-free service. [. . . ] The SPEAKERPHONE LED indicator will turn OFF and the LCD Screen will return to STANDBY mode. "Pro" (short for programming) appears on the LCD Screen. You can store up to 22 digits, including a TONE (*) and a PAUSE ( REDIAL ), each of which is counted as one digit. For 3 one-touch dialing: Press one of the 3 one-touch SPEED DIAL buttons ( M1 - M3 ). For 10 two-touch dialing: Press the MEM button, then press one of the TELEPHONE KEYPAD buttons ( 0 - 9 ) to store a phone number in. 4. The stored number and the location will be shown on the LCD Screen. Press the STORE button twice or wait 3 seconds and the LCD Screen will return to STANDBY mode. Repeat steps 1 - 5 to store numbers into other Speed Dial memory locations. When the batteries are dead or removed for more than 3 minutes, the stored numbers will be erased. When the HANDSET is on the BASE UNIT, press the desired one-touch SPEED DIAL button ( M1 - M3 ), and the stored number appears on the LCD Screen for 3 seconds. If you want to change the stored number, just store a new number, as described above and the old number will be erased automatically. Speed Dialing the 3 One-Touch Memory Numbers 1. Pick up the HANDSET or press the SPEAKER button. Press one of the one-touch SPEED DIAL buttons ( M1 - M3 ). The number will be displayed and dialed automatically. Speed Dialing the 10 Two-Touch Memory Numbers 1. Pick up the HANDSET or press the SPEAKER button. Press the desired TWO-TOUCH MEMORY button ( 0 - 9 ). Resetting the Phone In the rare case of abnormal telephone line interference, the phone may not work properly and may need to be reset. Make sure the phone is hung up, use a pointed object like a straighted paper clip and stick it into the small hole in the bottom of the phone (marked RESET) for 2 seconds. The LCD Screen will return to the SETUP mode and the memory numbers will need to be reprogrammed. 14 Caller ID Operation Setting up the LCD Screen Contrast, Language, Area Code, Time and Date You may need to set up the LCD Screen contrast level, language, area code, time, and date for the telephone when you power the phone for the first time or when you move to an area that has a different area code. This is necessary because the phone must distinguish local or long distance calls to properly dial calls from the Caller ID records list. [. . . ] XACT Communication Products assumes no responsibility for any special, incidental, or consequential damages. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitations of special, incidental or consequential damages or limitations on how long a warranty lasts, so the above exclusion and limitation may not apply to you. Warranty Service Not Provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorized modification, the affixing of any attachment not provided by XACT Communication Products with the telephone and/or loss of parts. [. . . ]