User manual XEROX COLORQUBE 9202

[. . . ] Xerox®, CentreWare®, PrintingScout®, Walk-Up®, ColorQube, Global Print Driver, Mobile Express Driver, and the sphere of connectivity design are trademarks of Xerox Corporation in the United States and/or other countries. Adobe Reader®, Adobe Type Manager®, ATMTM, Flash®, Macromedia®, Photoshop®, and PostScript® are trademarks of Adobe Systems Incorporated in the United States and/or other countries. Apple®, AppleTalk®, Bonjour®, EtherTalk®, Macintosh®, Mac OS®, and TrueType® are trademarks of Apple Computer, Inc. in the United States and/or other countries. [. . . ] The printer creates the low-level policies from the most specific to the most general. IPsec uses the first applicable rule when deciding the course of action. For example, if three policies are added in the following order: 1. Bypass for a specific IP within the local subnet The printer organizes the policies in the following order: 1. Bypass for a specific IP in local subnet 2. Deny all Note: Changing IPsec Policies might cause the printer to lose connection with the network. For information on how to re-establish connectivity, see Disabling IPsec at the Control Panel on page 66. ColorQube 8570/8870 Color Printer System Administrator Guide 65 Security Features Creating Policies To configure a new IPsec Policy and add it to the list: 1. On the IPsec Policy page, select a Host Group, a Protocol Group, and an Action from the dropdown lists, then click Add Policy. If you select default Hosts, Protocols or Actions that are not already configured, pages display that enable you to modify the default groups/actions. In addition, links provided below the dropdown lists enable you to add new groups/actions. After you have configured the list of IPsec Policies, click Apply at the bottom of the page to update the IPsec Policy database. You can create a maximum of 100 Host Groups. On the Create New Host Group page, next to Group Name, type a name, up to 64 characters. Type a Description, up to 256 characters. Note: The name and description cannot contain the following special characters: " ' & ?Next to Address List, type at least one set of network information, up to 512 characters, for the host group in the Address List. Separate entries in the Address List with a single space. Note: The Address List cannot contain the following special characters:" ' & ?+ = < > , ; \ A set of network information in the Address List must use the notation shown in the following table: Address List Example ANY LOCAL 10. 1. 1. 0/255. 255. 255. 0 fe80::/64 10. 1. 1. 1-10. 1. 1. 5 10. 1. 1. 7 2002:10:1::f5:1:1-2002:10:1::f5:1:5 2002:10:1::f5:1:7 Meaning Enables communication with any network host. Enables communication with all hosts on the same IPv4 and IPv6 subnets as the printer. Enables communication with all hosts on the IPv4 10. 1. 1. 0 subnet. Enables communication with all hosts on the IPv6 fe80:: subnet. [. . . ] UNDER NO CIRCUMSTANCES WILL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, ARISING OUT OF OR IN ANY WAY RELATED TO THE SOFTWARE, EVEN IF THE AUTHORS HAVE BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGE OR IF SUCH DAMAGE COULD HAVE BEEN REASONABLY FORESEEN, AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED. SUCH LIMITATION ON DAMAGES INCLUDES, BUT IS NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOST PROFITS, LOSS OF DATA OR SOFTWARE, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OR IMPAIRMENT OF OTHER GOODS. IN NO EVENTWILL THE AUTHORS BE LIABLE FOR THE COSTS OF PROCUREMENT OF SUBSTITUTE SOFTWARE OR SERVICES. YOU ACKNOWLEDGE THAT THIS SOFTWARE IS NOT DESIGNED FOR USE IN ON-LINE EQUIPMENT IN HAZARDOUS ENVIRONMENTS SUCH AS OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR CONTROL, OR LIFE-CRITICAL APPLICATIONS. [. . . ]