User manual XEROX DOCUMENT CENTRE 535 QUICK REFERENCE GUIDE

[. . . ] After you select your desired paper output size, the copier/printer reduces or enlarges the image to fit onto the output paper. Xerox DocuColor 2006 22­1 22. Copy Features · Preset % - The Preset % settings are shown on the Copier Control Panel. The copier/printer automatically determines output size based on the selected reduction or enlargement percentage. The following tables list the Preset % options available on the DocuColor 2006 and how each percentage affects certain paper sizes. Percentage 64% 78% 129% 154% 200% Paper Sizes 11 in x 17 in 8. 5 in x 11 in 8. 5 in x 14 in 8. 5 in x 11 in 8. 5 in x 11 in 11 in x 17 in 5. 5 in x 8. 5 in 8. 5 in x 14 in 5. 5 in x 8. 5 in 11 in x 17 in Percentage 70 % 81% 86% 115% 141% Paper Sizes A3 A4 B4 A4 A3 B4; A4 B5 B4 A3; B5 A4 B5 B4 U. S. [. . . ] This feature offers an Auto Contrast option as well as five lighten/darken levels. Press the Clear All button to restore default settings. Position the original on the Document Glass or in the Document Feeder. For more information on positioning originals on the Document Glass and using the Document Feeder, go to the Basic Copying chapter. Quality Adjustment selection is displayed on the Copier Screen. Use the Arrow Buttons to highlight the Sharpness option. Sharpness selection is displayed on the Copier Screen. Use the Arrow Buttons to highlight a sharpness level between Lighter and Darker. A lighter sharpness level produces softer lines. A heavier sharpness level produces more distinct lines. 22­16 Xerox DocuColor 2006 22. Quality Adjustment selection is displayed on the Copier Screen. The Main Screen is displayed on the Copier Screen. 10. Enter your desired number of copies using the Numeric Keypad. The Main Screen is displayed on the Copier Screen. 10. Enter your desired number of copies using the Numeric Keypad. Press the Start button. 22­18 Xerox DocuColor 2006 22. Copy Features Advanced Features The Advanced Features option includes the following: · Output ­ to change the tray that your copies output to. The option can be set to either the Exit Tray, the left-hand side output tray, or the Top Tray, the tray above the printer where print jobs are output. If the Sorter/Stacker option is attached, there are other output selections available. Refer to the section Determining Output with the optional Sorter/Stacker for additional information. Erase ­ to set an erase value from 0 -- 50 mm for the following dimensions on your copy output: · · · Horizontal Vertical Center · · The DocuColor 2006 copier/printer automatically creates a 4 mm border on every copy. This is not an erase feature and can not be deleted. · 2-Sided ­ to produce double sided output, output with images on both the front and back sides, from single sided input. The following orientation options are available for the 2-Sided feature: · · · Portrait ­ to have to images flip along the long edge of the output. [. . . ] If the DocuColor 2006 is in printer mode, press the Copy button to enter copy mode. Press the Clear All button to restore default settings. Position the originals in the Document Feeder with the long edge of the paper entering the Document Feeder first (Long Edge Feed). You must use the Document Feeder to create a 2 Up copy. For more information on positioning originals in the Document Feeder, go to the Basic Copying chapter. [. . . ]