User manual XEROX PHASER 2135

[. . . ] P H A S E R® 2135 COLOR PRINTER User Guide Phaser® 2135 Color Printer User Guide 071-0748-00 March 2001 Copyright © Xerox Corporation. Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Phaser®, PhaserShare®, ColorStix®, the TekColor® icon, Made For Each Other®, DocuPrint®, WorkSet®, Ethernet®, the stylized X, and XEROX® are registered trademarks of Xerox Corporation. [. . . ] index) I I Glossy coated paper I I 80 sheets Multi-Sheet Bypass Feeder I Thick card stock I I Thin card stock I I 70 sheets I I User Guide 27 Supported Media (cont'd. ) Supported Media Labels I Capacity 50 sheets Xerox Phaser Color Laser Labels 176 g/m2 (108 lb. tag) Other labels 121-203 g/m2 (74-125 lb. tag) Monarch, #10, C5, C4, DL, JIS B5, 9 x 12 Xerox Phaser Premium Business Cards 190 g/m2 (70 lb. bond) I I Envelope I Business cards I I 25 sheets Light paper I I I For information on loading transparencies, see page 32. Use Xerox Phaser 35 Series Transparencies only. When sending a Multi-Sheet Bypass Feeder job from the driver, the printer prompts you to load the correct media if the media does not match what you previously loaded. If a different media size is loaded in the MBF than what is selected in the driver, the printer stops and the front panel prompts you to load the correct media size in the MBF. I Multi-Sheet Bypass Feeder 28 Phaser 2135 Color Printer Loading the Multi-Sheet Bypass Feeder (MBF) 1. Open the Multi-Sheet Bypass Feeder tray and unfold the two extensions (a). Open the Side Output Tray on the left side of the printer and swing out the two extensions where the media will exit (b). b a 0748-29 I The Multi-Sheet Bypass Feeder does not automatically detect paper size. Automatic 2-Sided Printing is not available with the Multi-Sheet Bypass Feeder. Multi-Sheet Bypass Feeder I User Guide 29 3. Insert the media and adjust the guide for the media width: 5 R 21335 E P H A S E R 21 PHAS 0748-43 I I I I For Xerox Phaser 35 Series Transparencies, refer to page 32. For Xerox Phaser Color Laser Labels, refer to page 35. For Xerox Phaser Premium Business Cards, refer to page 35. Multi-Sheet Bypass Feeder 30 Phaser 2135 Color Printer 4. The front panel prompts you to select the loaded media type and size. Press the Value buttons to select a media type: Media Type Options Media Type Options Plain paper Phaser 2135 Transparency Heavy paper Glossy paper Thick card stock Thin card stock Labels Envelope Business cards Light paper 190 g/m2 (70 lb. Note See Supported page sizes and print area on page 18. Press the Enter button to save your selection. To avoid possible print-quality and media-feed problems, make sure that the loaded media matches the tray type setting. Send the job to the printer. User Guide 31 Loading Specialty Media in the Multi-Sheet Bypass Feeder (MBF) Special Media Xerox Phaser 35 Series Transparencies 1. Insert the transparencies (maximum capacity is 50 Standard or Premium sheets: a. Place the transparencies Long-Edge Feed (LEF). Adjust the Multi-Sheet Bypass Feeder guides for the width of your transparencies. 0748-68 2. 3. Open the Side Output Tray on the left side of the printer. The front panel prompts you to select the loaded media type and size. [. . . ] INGESTION: In unlikely event of ingestion of a cleaning pad, first aid measures should focus on removal of the object and preventing choking. Once removed, keep affected person at rest. SECTION 5 - FIRE FIGHTING MEASURES FLASH POINT: Flash point of liquid ethyl alcohol is 55 degrees F (13 degrees C) FIRE & EXPLOSION HAZARDS: Ethyl alcohol may release vapors which may ignite at or above flash point. EXTINGUISHING MEDIA: Dry chemical, carbon dioxide, or foam. [. . . ]