User manual XEROX PHASER 3130

[. . . ] This manual is provided for information purposes only. All information included herein is subject to change without notice. Xerox Corporation is not responsible for any damages, direct or indirect, arising from or related to use of this manual. All rights reserved. · Phaser 3130 and Xerox logo are trademarks of Xerox Corporation. · PCL and PCL 6 are trademarks of Hewlett-Packard Company. [. . . ] Select the required print order from the drop-down list. · Normal: Your printer prints in normal order. · Reverse All Pages: Your printer prints all pages in reversed order. This setting is helpful when you are using the rear output tray. · Print Odd Pages: Your printer prints only the odd pages of the document. · Print Even Pages: Your printer prints only the even pages of the document. 4. 26 PRINTING TASKS Property Use Printer Fonts Description When this option is checked, the printer uses the fonts that is stored in its memory to print your document, rather than downloading the fonts used in your document. If, however, you use fonts in your document that are very different from those resident in the printer, your output will appear very different from what it looks like on the screen. 4 PRINTING TASKS 4. 27 Setting Up Locally Shared Printer You can connect the printer directly to a selected computer, which is called "host computer", on the network. The printer can be shared by other users on the network through a Windows 9x, Me, 2000, XP or NT 4. 0 network printer connection. Windows 9x/Me Setting Up Host Computer 1 Start Windows. 2 From the Start menu, select Control Panel, and doubleclick on the Network icon. 3 Check the File and Print Sharing box, and click OK. 4 Click Start and select Printers from Settings, and doubleclick your printer name. 5 Select Properties in the Printer menu. 6 Click the Sharing tab, and check the Shared As box. Fill in the Shared Name field, and then click OK. Setting Up Client PC 1 Right-click Start, and select Explorer. 2 Open your network folder in the left column. 3 Right-click the shared name, and select Capture Printer Port. 4 Select the port you want, check the Reconnect at log on box, and then click OK. 5 From the Start menu, select Settings and Printers. 7 From the Printer menu, select Properties. 8 Press the Details tab, select the printer port, and click OK. 4. 28 PRINTING TASKS Windows NT/2000/XP Setting Up Host Computer 1 Start Windows. 2 From the Start menu, select Settings and Printers. (Windows NT/2000) From the Start menu, select Printers and Faxes. (Windows XP) 3 Double-click your printer icon. 4 From the Printer menu, select Sharing. (Windows 2000) Check the Share this printer box. (Windows XP) Fill in the Share Name field, and than click OK. (Windows NT) Fill in the Shared Name field, and then click OK. [. . . ] · The printer uses heat and pressure to fuse toner to the paper. Ensure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0. 1 second). 7. 24 APPENDIX Paper Specifications Category Acid Content Caliper Curl in Ream Cut Edge Conditions Specifications 5. 5 ~ 8. 0 pH 0. 094 ~ 0. 18 mm (3. 0 ~ 7. 0 mils) Flat within 5 mm (0. 02 in. ) Cut with sharp blades with no visible fray. Must not scorch, melt, offset, or release hazardous emissions when heated to 200 °C (392 °F) for 0. 1 second. Long Grain 4% ~ 6% by weight 100 ~ 250 Sheffield Fusing Compatibility Grain Moisture Content Smoothness Paper Output Capacity Output Tray Face-down output tray Face-up output slot Capacity 50 sheets of 75 g/m2 bond (20 lb) paper 1 sheet of 75 g/m2 bond (20 lb) paper 7 APPENDIX 7. 25 Printer and Paper Storage Environment Paper storage environmental conditions directly affect the feed operation. [. . . ]