User manual XEROX PHASER 6125

[. . . ] Phaser® 6125 color laser printer User Guide Guide d'utilisation Guida dell'utente Benutzerhandbuch Guía del usuario Guia do Usuário Gebruikershandleiding Användarhandbok Betjeningsvejledning www. xerox. com/support Unpublished rights reserved under the copyright laws of the United States. Contents of this publication may not be reproduced in any form without permission of Xerox Corporation. Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc. XEROX®, CentreWare®, Phaser®, and Walk-Up® are trademarks of Xerox Corporation in the United States and/or other countries. [. . . ] Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the tray when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal. Long periods of storage in extreme conditions can cause glossy paper to curl and jam the printer. Printing Glossy Paper from the Paper Tray 1. Gently pull open the paper tray, and open the paper guides. 6125-080 Phaser® 6125 Color Laser Printer 4-26 Printing on Specialty Media 2. Open the output tray to hold the printed sheets. 6125-021 3. Fan the glossy paper to release sheets that are stuck together. 6125-014 Phaser® 6125 Color Laser Printer 4-27 Printing on Specialty Media 4. Insert the glossy paper into the paper tray, and adjust the paper guides to fit the paper. Do not load more than 25 sheets. 6125-085 5. In the printer driver, select either Glossy Paper as the paper type or Tray as the paper tray. Printing Glossy Paper from the Manual Feed Slot 1. Slide the width guides of the manual feed slot to fit the appropriate media. 6125-020 Phaser® 6125 Color Laser Printer 4-28 Printing on Specialty Media 2. Open the output tray to hold the printed sheets. 6125-021 3. Place the side to be printed facedown with the top of the page toward the front of the printer. 6125-079 4. If necessary, press the paper guides inward to fit the paper. Phaser® 6125 Color Laser Printer 4-29 Printing on Specialty Media Printing on Glossy Paper Using the Control Panel To print on glossy paper using the control panel: 1. On the control panel, select the paper type: a. Select Tray Settings, and then press the OK button. Select Tray, and then press the OK button. Select Paper Type, and then press the OK button. Select Glossy Paper, and then press the OK button. Using the Driver To print on glossy paper using the print driver: 1. Select this printer as the printer to be used and click Properties to display the dialog box. Select the appropriate paper tray from Paper Tray. From Paper Size, select the size of the original document. [. . . ] Three meters are available: Total Impressions, Color Impressions, and Black Impressions. The billing meter counts the number of pages printed properly. Single side print (including N-up) is counted as one impression. When printing color data, that has been converted by using ICC profile on an application, with the Color (Auto) setting, the data is printed by color even if it seems to be black and white data on the monitor. [. . . ]