User manual XEROX WORKCENTRE 7655

[. . . ] The information in this document is correct at the time of publication. Xerox reserves the right at any time to change the information without notice. Changes and technical updates will be added in subsequent editions of the documentation. For the latest information go to www. xerox. com. [. . . ] This option is only valid in the spool mode. 249 8 Printer Environment Settings · -C parameter To print from the machine using the PostScript language, use the -C option to specify the form of output. In the non-spool mode, the client must be a Windows NT machine to use this option. NOTE: If the PostScript logical printer and the -C option are configured simultaneously using CentreWare Internet Services, some functions may not work as expected. Also, when specifying the PostScript logical printer as a default printer on UNIX, it is recommended not to use the -C option by lpr. Refer to the -C option of the lpr command. NOTE: Some options which are not listed here (e. g. -m option) and which are not processed by the workstation sending the print instructions, will not be valid. NOTE: In the spool mode, up to 32 files can be specified in one lpr command. Any files specified after the 32nd file will be ignored. Example To print a file named file1 to a printer named fxPS, enter the following command: %lpr -PfxPS file1 To print three copies of file1 and three copies of file 2 to fxPS, enter the following: %lpr -PfxPS -#3 file1 file2 To print a file named file1 to a printer named fxPS as an A4-sized (210 × 297 mm/ 8. 3 ×11. 7 inches) duplex job, enter the following command: %lpr -PfxPS -C, DUP, A4 file1 Delete (lprm) The lprm command is used to delete print data. Command format /usr/ucb/lprm [-P printer name] job number Command options The following command options are available. The sequence of the options does not affect the outcome. To use more than one argument at the same time, separate them by commas and enclose all the arguments with " ". %lpstat -u "user1, user2, user3" · -o [printer name] This option displays the print data for the specified printer. · -t This option displays all the information. · -u [user name] This option displays information about print data received from specified users. · -v [printer name] This option displays the printer name and the path name for the machine. The printer name is specified in the argument. 251 8 Printer Environment Settings NOTE: Long file names will be truncated. NOTE: Information for a maximum of 64 print instructions can be displayed. NOTE: If two or more types of print languages/modes are set up on a single workstation, identical job numbers may be displayed when an inquiry command (lpstat) is issued. Example To inquire about the print data received by a printer named fxPS, enter the following command: %lpstat -ofxPS SunOS The lpq command is used to inquire about the status of the machine. NOTE: In the non-spool mode, this function is available to Windows NT clients but not to SunOS clients. [. . . ] 370 SMB Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 SMB Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 Test Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 Windows TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]