User manual YAESU FTDX9000 PEP9000 UPDATE V0521 AND V11.54

[. . . ] The update software is available from our website at http://www. yaesu. com. The CT-119 programming cable is available from your authorized Vertex Standard dealer. You may also order by email to Vertex Standard parts department, . The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) of the FTDX9000Contest, FTDX9000D and FTDX9000MP The software versions can be displayed on the radio While holding the three buttons [GEN][50][ENT] turn the radio on. The software version will be displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation. [. . . ] Please see the Data Management Operation Manual for the procedure to save your settings to a CF card. (1) Turn off the main power switch located on the back of the FTDX9000 (or turn off the power supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. (2) Connect the CT-119 cable's DB-9F connector to the serial port COM1 in the back of your computer. Plug the mini-DIN connector of the CT-119 into the ACC jack connector on the rear of the transceiver. Be sure that the arrow indicator on the mini-DIN plug is down. If you use a USB to serial adapter, you might need to change the COM-Port number. Main Power SW ACC (3) Connect the AC power cord (in the case of the FTDX9000MP connect the power supply cables). (4) Turn on the main power switch located on the rear panel of the FTDX9000 (or on the top of the power supply for the FTDX9000MP). [NOTE: The radio will not show a display now. ] (5) Now go to the desktop and find the FSW004 as shown below. Double-click the FSW004 icon, displayed on the Program Screen. (6) When the program opens, confirm that the file AH010N_V0521. SFL is highlighted; if not, click on it to highlight it. (7) Click on [WRITE] in the program window. A green status bar should appear below the [WRITE] button to show the progress of the download. Do not interrupt the process until it completes. (8) When the loading process is complete, an [OK?] box will appear. Located on the rear panel of the FTDX9000 (or on the top of the power supply for the FTDX9000MP. Remove the CT-119 cable from the DB-9F connector of your computer and the ACC connector on the rear of the transceiver. (10) Turn on the main power switch located on the back of the FTDX9000 (or on the top of the power supply for FTDX9000MP). (11) Press and hold in the [FAST] and [LOCK] keys while turning the radio back on. This resets the radio and locks in the new software. Follow the instructions below to update the EDSP. 8-pin mini-DIN PGM-SW 1. Connect a RS-232C straight cable to the CAT connector. Insert the 8-pin mini-DIN PMG-SW connector to FTdx9000 (ACC) jack. I choose the . sfl file of the version 0521to write in and push WRITE of the screen. Remove the 8-pin mini-DIN PMG-SW and the RS-232C cable. Reset the radio to default. NOTE: for a more detailed description see the Main CPU programming. EDSP Software Update This procedure is used for uploading new EDSP Software into the FTDX9000 Amateur Transceivers, from your personal computer, using the RS-232C, DB9F to DB9F straight cable. [. . . ] Click on the COM Select box arrow and choose a different COM port from the drop down menu in the EDSP9000 writer. 7. Turn the front Power Switch and the Main Power Switch in the back OFF (or turn off the power supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. This resets the radio and locks in the new software. The updating process is now complete It is important to reset the FTDX9000. [. . . ]