User manual YAESU FTM-10R

[. . . ] VHF/UHF DUAL BAND FM TRANSCEIVER FTM-10R OPERATING MANUAL VERTEX STANDARD CO. , LTD. VERTEX STANDARD 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan US Headquarters 10900 Walker Street, Cypress, CA 90630, U. S. A. YAESU EUROPE B. V. Box 75525, 1118 ZN Schiphol, The Netherlands Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U. K. VERTEX STANDARD HK LTD. Unit 5, 20/F. , Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VERTEX STANDARD (AUSTRALIA) PTY. , LTD. Normanby Business Park, Unit 14/45 Normanby Road Notting Hill 3168, Victoria, Australia Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Front Panel & Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the key to display the current time. You will notice the "hour" column blinking. Rotate the DIAL knob to set the exact current hour. Press the key to move the blinking column to "minute". Rotate the DIAL knob to set the exact current minute. key is pressed in accordance with the time When the signal from a radio station etc, the FTM-10R's clock may be set more precisely. Press the [VOL/SEL] key to exit to normal operation. 5. FTM-10R OPERATING MANUAL 53 CLOCK/TIMER OPERATION DISPLAYS THE CURRENT TIME Activate the Clock 1. Press and hold the [VOL/SEL] key for one second to activate the Menu mode. Rotate the DIAL knob to select Menu Item "F9 CLOCK". Press the key to enable selection of this Menu Item. Rotate the DIAL knob to select "ON". Display the Clock 1. Press the [VOL/SEL] key repeatedly to display the Clock, Stop Watch Timer, or Thermometer. Rotate the DIAL knob to display the Clock. When the Clock is already displayed in the above step, this step is unnecessary You may change the setting of the DIAL knob, so it does not return automatically to the Frequency Select dial function. Press and hold the key for one second to reset the "Minute" and "Second" clock display to "00". Example 1 "XX:00:00" ~ "XX:29:59" to reset to "XX:00:00" "10:29:59" "10:00:00" Example 2 "XX:30:00" ~ "XX:59:59" to reset to "XX+1:00:00" "10:49:49" "11:00:00" You may change the time system via the Menu Item "T4 12H/24H". Available selections are "12H" and "24H" You may change the clock format via the Menu Item "T3 T FORMAT". Available selections are "HH:MM:SS", "HH:MM", and "MM:SS". The accuracy of the clock on this radio is 30 seconds per month under the normal temperature. This accuracy depends on the temperature fluctuations in the place where the radio is used. The clock has a back-up Lithium battery, and will function for around 2 months after disconnecting the power supply cable. 54 FTM-10R OPERATING MANUAL CLOCK/TIMER OPERATION USING THE STOP WATCH TIMER The Stop Watch provides several timing functions for your convenience at motor sports and rallies. [. . . ] Set the Menu Item "F4 AF PREST" to "OFF". See Page 86 Receiver audio volume level changes automatically The Automatic Audio Volume Controller is turned on. Set the Menu Item "F1 AF AUTO" to "OFF". See Page 56 No transmit even if pressing the PTT key PA feature or Horn Alert feature is turned on. [. . . ]