User manual YAESU FTM-350R APRS MANUAL

[. . . ] DUAL BAND FM TRANSCEIVER FTM-350R OPERATING MANUAL VERTEX STANDARD CO. , LTD. VERTEX STANDARD YAESU UK LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan US Headquarters 10900 Walker Street, Cypress, CA 90630, U. S. A. Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U. K. VERTEX STANDARD HK LTD. Unit 5, 20/F. , Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VERTEX STANDARD (AUSTRALIA) PTY. , LTD. Normanby Business Park, Unit 14/45 Normanby Road Notting Hill 3168, Victoria, Australia Contents Front Panel Controls & Switches . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Timer Page Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the [WiRES] key to access the Set Mode. Rotate the left side [DIAL] knob to select the access number ("CODE 0" ~ "CODE #") corresponding to the WiRESTM repeater, then press the [ESC] key to exit from the Set Mode. With the Internet Connection feature activated, the FTM-350R will generate a brief (0. 1 sec) DTMF tone according to your selection in step 3. This DTMF tone is sent at the beginning of every transmission to establish or maintain the link to the remote WIRESTM repeater operating in the "SRG" mode. To disable the Internet Connection feature, select the "OFF" selection in the Set Mode item "J06 WiRES". 20 FTM-350R OPERATING MANUAL INTERNET CONNECTION FEATURE FRG ("FRIENDLY RADIO GROUP") MODE 1. Press the [SET] key to enter the Set Mode, choose the "SIGNALING" group, choose the "J02 DTMF MEMORY" item, and then choose "FRG". Store the access code of the Internet link to the DTMF memory register. Then set item "J06 WiRES" in the "SIGNALING" group to "FRG". Press the [ESC] key three times to exit from the Set Mode and activate the Internet Connection feature in the "FRG" mode. The " " icon will appear on the display. To access an FRG node, perform the following procedures: 1) Press the [WiRES] key to access the Set Mode. 2) Rotate the left side [DIAL] knob to select the WiRES memory register corresponding to the WiRESTM repeater you wish to establish an internet link with. 3) Press the [ESC] key to exit from the Set Mode. 4) Press the [ ] key (located at the left edge of the [SMART FUNCTION] key while transmitting) while pressing the PTT switch to transmit the access code. To disable the Internet Connection feature, select the "OFF" selection in the Set Mode item "J06 WiRES". FTM-350R OPERATING MANUAL 21 DTMF OPERATION MANUAL DTMF TONE GENERATION 1. Press the microphone PTT switch to begin transmission. While transmitting, press the desired number keys on the microphone. When you have sent all the digits desired, release the PTT switch. DTMF AUTODIALER 1. To store a telephone number to a DTMF memory register, press the [SET] key and choose the "SIGNALING" group, then choose item "J02 DTMF MEMORY". Choose a DTMF register and enter the telephone number. Then Set Mode item "J03 DTMF MODE" in the "SIGNALING" group to "ON". Press the [ESC] key three times, to exit from the Set Mode, and activate the DTMF Autodialer. [. . . ] Do not install the transceiver on top of another heat-generating device (such as a power supply or amplifier). Avoid heating vents and window locations that could expose the transceiver to excessive direct sunlight, especially in hot climates. The FTM-350R should not be used in an environment where the ambient temperature exceeds +140 °F (+60 °C). 48 FTM-350R OPERATING MANUAL INSTALLATION SAFETY INFORMATION The FTM-350R is an electrical apparatus, as well as a generator of High RF (Radio Frequency) energy. You should exercise all safety precautions that are appropriate for this type of device. [. . . ]