User manual YAESUS VX-3R

[. . . ] VHF/UHF ULTRA-COMPACT DUAL-BAND TRANSCEIVER WITH WIDE BAND COVERAGE VX-3R OPERATING MANUAL VERTEX STANDARD CO. , LTD. VERTEX STANDARD 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan US Headquarters 10900 Walker Street, Cypress, CA 90630, U. S. A. YAESU EUROPE B. V. Box 75525, 1118 ZN Schiphol, The Netherlands Unit 12, Sun Valley Business Park, Winnall Close Winchester, Hampshire, SO23 0LB, U. K. VERTEX STANDARD HK LTD. Unit 5, 20/F. , Seaview Centre, 139-141 Hoi Bun Road, Kwun Tong, Kowloon, Hong Kong VERTEX STANDARD (AUSTRALIA) PTY. , LTD. Normanby Business Park, Unit 14/45 Normanby Road Notting Hill 3168, Victoria, Australia Contents General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Controls & Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Using the techniques learned earlier in the above procedures, store 144. 300 MHz into L1 Memory Channel #L1 (the "L" designates the Lower sub-band limit). Likewise, store 148. 000 MHz into Memory Channel #U1 (the "U" designates the U1 Upper sub-band limit). Set the radio to the Memory mode by pressing the [V/M] key. Press and hold in the [BAND] key for one second and rotate the DIAL knob while holding in the [BAND] key to select the desired PMS frequency pair (PMSxx Then release the [BAND] PMSxx). PMSxx key to initiate the Programmable (Band Limit) Memory Scan. Pxx The Memory Channel number will be replaced by "Pxx Tuning Pxx". and scanning will now be limited within the just-programmed range. Note: Do not forget to pull the DIAL knob to rotate the DIAL knob. 50 pairs of Band Limit memories, labeled L1 U1 through L50 U50 are available. You L1/U1 L50/U50 therefore can set upper and lower operation limits on a number of bands, if you like. 62 VX-3R OPERATING MANUAL SCANNING PRIORITY CHANNEL SCANNING (DUAL WATCH) The VX-3R's scanning features include a two-channel scanning capability, which allows you to operate on a VFO or Memory channel, while periodically checking a user-defined Memory Channel for activity. If a station is received on the Memory Channel which is strong enough to open the Squelch, the scanner will pause on that station in accordance SCN. RSM. with the Scan-Resume mode set via Set Mode Item 75: SCN. RSM See page 54. Here is the procedure for activating Priority Channel Dual Watch operation: 1. Press the [V/M] key momentarily to enter the Memory Recall mode, if you are not using memories already. Press and hold in the [F/W] key for one second, then rotate DIAL knob to select the memory channel you wish to be the "Priority" channel. Note: Do not forget to pull the DIAL knob to rotate the DIAL knob. The "PRI" icon will appear above of the volume level indicator, indicating it is the Priority channel. Now set the VX-3R for operation on another memory channel, or on a VFO frequency. Press and hold in the [V/M] key for one second. The display will remain on the VFO or memory channel selected. However, the "DW" icon will appear on the display, and every five seconds the VX-3R will check the Priority Channel for activity. If a station appears on the Priority Channel, the radio will pause on that channel, as described previously. [. . . ] Set Mode Item 91 [VFO. SKP] Function: Set the My Band. Available Values: ON/OFF Default: OFF The "My Band" feature allows you to select several operating bands, and make only those bands available for selection via the [BAND] key. ON: Only the bands that are turned on will be shown when pushing the [BAND] key. OFF: When the [BAND] key is pressed, the bands that are turned "OFF" will not be shown. [. . . ]