User manual YAKUMO LCD TV 38F

[. . . ] Do not attempt to service this product yourself, as opening or removing the cover may expose you to potential electric shock, only a qualified technician should service this product. Do not touch the screen directly with your fingers as it may damage the screen; the oil from your skin is difficult to remove. Do not apply pressure to the screen, the LCD screen is very delicate. Keep the TV away from extreme heat, cold or humid places. [. . . ] 5Reset: Resets picture settings to the factory default . PC MENU AUDIO MENU GENERAL MENU Input mode PC 1234Press MENU button to either display the "PC" or "AUDIO"or "GENERAL" menu. Press KEY CH+/CH- to scroll through the parameters Press VOL / VOL buttons to make changes to the parameters Press the ESC button to exit the menu 4 Input mode AV / Scart / S-Video: 1- Press MENU button to either display the "VIDEO" or "AUDIO"or "GENERAL" menu. 2- Press KEY CH+/CH- to scroll through the parameters 3- Press VOL / VOL buttons to make changes to the parameters 4-Press the ESC button to exit the menu . Name of Picture of submenu Instructions submenu 1 Brightness : Adjust the brightness of the picture , the image becomes brighter as the number increase. 2Contrast: Adjust the contrast of the picture, the image becomes higher as the number VIDEO MENU increase. Will appear and be adjusted only under NTSC mode. 5Sharpness :Adjust the amount of detail enhancement. 2Balance: Adjust the balance of the audio output from left to right. 3Audio Preset: Four different settings: Personal, Voice, Music and Theatre. AUDIO MENU 4 Treble: Adjust the treble of the sound, can only be adjust under Personal mode 5Bass: Adjust the bass of the sound, can only be adjust under Personal mode 1 Language: Change the GENERAL language of the menu, choose MENU between Languages 2Blue screen: Display the blue screen when no signal. 3Noise reduction: Reduce the noise of the picture, provide clearer picture. 4Input source: Display the current mode. 5Reset: Resets picture settings to the factory default . 5 Input mode TV 1234Press MENU button to either display "AUDIO" or "TV" or "GENERAL" menu. Press KEY CH+/CHthe "VIDEO" or to scroll through the parameters Press VOL / VOL buttons to make changes to the parameters Press the ESC button to exit the menu . Name of submenu Picture of submenu VIDEO MENU Instructions 1Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increase. 2Contrast: Adjust the contrast of the picture, the image becomes higher as the number increase. Will appear and be adjusted only under NTSC mode. 5Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increase. 1Volume: Adjust the volume. 2Balance: Adjust the balance of the audio output from left to right. 3Audio Preset: Four different settings: Personal, Voice, Music and Theatre. 4 Treble: Adjust the treble of the sound, can only be adjust under Personal mode 5Bass: Adjust the bass of the sound, can only be adjust under Personal mode AUDIO MENU 6 Name of submenu Picture of submenu Instructions 1 Channel: Change the TV channel. 2System: Select the TV standard. 3 Skip If you want skip a channel, you can turn it on and this channel will be skip in the next time. 4 AFC: Auto frequence control. Press the button improve the image quality 5 Fine tune If the image received is not very good, you can press PRO to select Fine Tuning item in menu. Then, press VOL button to adjust and improve the image quality. [. . . ] If possible, use a special screen clearner sheet or a solution suitable for static electrical appliances. Using any cleaner other than water or a mild cleaner may damage your TV and will not be covered under the warranty. Storage of unit If the LCD TV is not in use for a long time, please unplug it and store it in its original box to avoid any damage. Disclaimer Any damage resulting from use of any cleaner that is not mentioned above is not covered under the terms of the warranty on this product. [. . . ]