User manual YAKUMO RECORD MASTER HDD

[. . . ] Please carefully study this manual and always keep it available. There are some installation and operation precautions which you should be aware of. 1. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] + Press to change channels or move up in 6. VOL-: Press to change channels or move down 8. GAME: Exit the main menu or guide screen. TELETXT: Press to mute/un-mute audio volume. The servicer provided with text message transmitted to TV has Teletext decoder. The default setting is "OFF", press / and / button enter the Teletext or Teletext Subtitle. P+: Note: Please take out of isolated plastic piece under battery, before you use the remove control for the first time. GB-9 Panel Description Front Panel 1 2 3 4 1. LED: Red light refers to the Yakumo Receiver XS DVB-T is in standby mode; Green light refers to the Yakumo Receiver XS DVB-T is on; Orange light refers to the VCR send the program to TV. Channel up: Press to change channels or move up in the menus. Channel down: Press to change channels or move down in the menus. Standby button: Press to be (off) in standby mode. GB-10 Panel Description Rear Panel 8 1 2 3 4 5 6 7 1. RF IN: Aerial signals input. Moving / button of remote control to change the setting. GB-18 Guide of Main Menu Music Program List Under the main menu, moving / button of remote control to highlight the program list menu, then press the "OK" button to enter the Music Program List, and then will display the following list: No. Program edit table Program Name Favor Move Del The default highlight menu bar is the one on the first line or the one operated lastly. Moving / button of remote control to change the setting. GB-19 Guide of Main Menu Sort Under the main menu, moving / button of remote control to highlight the program list menu, then press the "OK" button to enter the Sort item, a sub-menu will appear on the TV screen. To select the desired in the program list, you should firstly display the Program list by directly pressing "OK" button on the remote control at the non-menu mode. When you use / button to switch from one channel to another, the video from the selected channel will be displayed on the screen. In order to make it convenient to find your required program in the list, press "OK" button on the remote control to sort all the programs in name, service ID, channel number. Switching between TV and radio programs is as easy as pressing "TV/RADIO" button on the remote control. The program list will disappear after pressing "EXIT" or "MENU" button. GB-20 Guide of Main Menu Program Search Under the main menu, moving / button of remote control to highlight the Program Search menu, then press the "OK" button to enter the sub-menu. For beginners, Auto Search is the best choice. First use / button to select Auto item in the program search menu and then press "OK" button to display Auto Search menu. Before here, you should select right country and default by using / button. [. . . ] The exclamation point within an equilateraltriangle is intended to alert the user to the presence of important operating andmaintenance (servicing) instructions in theliterature accompanying the appliance. If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electrinic Equipment Directive) GB-32 Service and Warranty Service In case of technical problems with your Yakumo product, contact our hotline on 00 800 / 92 58 66 00. Warranty If you think that you need to make a claim on your Yakumo product under the warranty, call the hotline on 00 800 / 92 58 66 00. [. . . ]