User manual YAMAHA ADD-ON EFFECTS INSTALLATION GUIDE

[. . . ] Add-On Effects Installation Guide Add-On Effects-Installationshandbuch Guide d'installation des Add-On Effects Guía de instalación de Add-On Effects Please read this first. Thank you for choosing a Yamaha Add-On Effects package. Add-On Effects are software packages that install additional high-quality effects programs on digital consoles. Please read this installation guide thoroughly before using the package so you can take full advantage of the AddOn Effects for a long period of time. Bitte zuerst lesen. Vielen Dank, dass Sie sich für die , , Add-On Effects" von Yamaha entschieden haben. , , Add-On Effects" sind hochwertige Effektprogramme, mit denen man sein Digital-Pult nachrüsten kann. [. . . ] The installer window opens. Add-On Effects Installation Guide 7 ENGLISH 17 When the installation is complete, the following 17 Select [Authorize], [Get access key from authentication server], then [Have already created registration code], then click [Next]. The following window opens. The following window opens. 23 Click [Save in file] to save the access key as a 18 Click [Read from file] to read the text file saved in Step 13. If you wrote down the ID and code on a piece of paper, enter the ID and code from the keyboard. You can also write down the access key displayed on the screen. 24 Copy the saved text file to the computer (#1) that is connected to the console. Follow the steps below on computer #1. 19 Make sure that the correct PRODUCT ID and registration code are displayed, then click [Next]. The window indicates "To get access key, get ready to connect to the Internet and click [Next]. " 25 Start the installer, select [Authorize], then [Have already obtained access key], then click [Next]. The following window opens. 20 Make sure that you are prepared to access the Internet, then click [Next]. The computer connects to the authentication server and obtains the access key. 21 When the access key is obtained, the following window opens: 26 Click [Read from file] to read the text file saved in Step 23. 27 Make sure that the correct access key is displayed, then click [Next]. The I/O port setting window opens. 28 Make sure that the I/O ports specified in Step 9 22 Select [Save access key to write into console later. ], then click [Next]. A window indicating the installation progress opens, and the Add-On Effects package is installed. 8 Add-On Effects Installation Guide 29 When the installation is complete, the following window opens. Direct De-authorization If you wish to move the license of the Add-On Effects from one console to another, you must first de-authorize the license on the current console. If you can access the Internet directly from your computer, follow the steps below to deauthorize the software. See page 10 if you access the Internet from a different computer. Follow Steps 1 through 6 (on page 5) for direct installation, then proceed with the following. 7 Select [De-authorize], then click [Next]. The following window opens. 30 Remove the check mark from the [Start online user registration] check box, then click [Finish]. We recommend that you access the following web page from a computer connected to the Internet and register the product. User registration entitles you to additional information and support. http://www. yamahaproaudio. com/register/ NOTE: After the installation is complete, the registration code and access key will become invalid. To avoid problems that may occur during re-installation, after the installation is complete, delete the text files that contain the registration code and access key. 8 Select [Create unregistration code], then click [Next]. The following window opens. 31 Turn off the power to the console, then turn it on. The console starts in normal mode. 32 Access the EFFECT LIBRARY page, and verify that the Add-On Effects you purchased are displayed and that you are able to recall them. 9 Enter the PRODUCT ID, then click [Next]. The I/O port setting window opens. The installation is now complete. NOTE: If you want to continue installing other add-on effects, you must power-cycle the console and repeat the procedure from step 2. Add-On Effects Installation Guide 9 ENGLISH 10 Make sure that "YAMAHA USB IN 0-1" is selected for the Input port and that "YAMAHA USB OUT 0-1" is selected for the output port, then click [Next]. The "Connecting to the console. . . " message is displayed and the unregistration code is created. If you are using Mac OS 9, select "xxxx-1 (xxxx will be the name of the console you are using)" for the Input port, and "xxxx-1 (xxxx will be the name of the console you are using)" for the output port. [. . . ] The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept all terms outlined herein. If you do not agree to the terms, return this package unopened to Yamaha for a full refund. [. . . ]