User manual YAMAHA AV-85PY

[. . . ] 3 Profile of This Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Speaker Setting-up for This Unit . . . . . . . . . . . . . . . 5 Yamaha Active Servo Technology . . . . . . . . . . . . 6 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (For video sources, turn the TV/monitor ON. ) * The indicator corresponding to the selected input source will illuminate. Notes In the step 3, if two or more program sources are selected at the same time (by using input selectors), be sure to remember the priority order of the input sources. Priority order of audio sources: 1) TAPE 1 MON, 2) VCR 1 MON, 3) VCR 2 MON/TAPE 2 MON, and 4) LD/TV, TUNER, CD or PHONO. Priority order of video sources: 1) VCR 1 MON, 2) VCR 2 MON/TAPE 2 MON, and 3) LD/TV. q If you select LD/TV, TUNER, CD or PHONO, be sure that TAPE MON and/or VCR MON input selectors are not being selected. q If you select TAPE 1 MON and VCR 1 (or 2) MON input selectors at the same time, the result will be the visual of the VCR and the sound from the audio tape. q If you select both LD/TV and TAPE MON input selectors at the same time, the result will be the visual of the LD player and the sound from the audio tape. q Once you play the LD player, its visual will not be interrupted even if other input selectors except VCR MON input selectors are selected. q If you select TAPE 1 MON and VCR 1 (or 2) MON input selectors, and another input selector at the same time, the result will be the visual of the VCR and the sound from the audio tape. 4 5 Play the source. VOLUME 0 -- dB Adjust to the desired output level. 6 If desired, adjust the BASS, TREBLE, BALANCE controls, etc. (Refer to page 15. ) and use the digital sound field processor. (Refer to page 16. ) 13 1, 4 2 To record a source to tape 1 Select the source to be recorded. 4 To monitor the audio and/or video signals being recorded, press the input selector button for the audio or video tape recorder being used to make the recording. * To dub from tape to tape, refer to the "Notes" shown below. * When selecting LD/TV, TUNER, CD or PHONO, be sure the TAPE 1 MON, VCR 1 MON or VCR 2/TAPE 2 MON input selector(s) are not also selected. * A red selector switch indicator takes priority over an orange indicator. Notes There are three ways to dub from tape to tape: 1) To record from VCR 2 or tapedeck 2 to VCR 1, press both the VCR 2 MON/TAPE 2 MON and VCR 1 MON selector switches (so both the indicators are lighted red). A big, powerful sound is reproduced lively and dynamically. In this program, the center seems even more deeply behind the front speaker pair, creating an expansive, large hall ambience. ENHANCED CONCERT VIDEO MONO MOVIE ROCK CONCERT CONCERT HALL OFF Switch : When any program is not used with the selected source, press this switch. The sound is output only from the front speakers. 16 Notes on Operation of Sound Field Programs q In the CONCERT VIDEO, MONO MOVIE, ROCK CONCERT and CONCERT HALL, no sound is heard from the center speaker. When the monaural sound source is played in the DOLBY PRO LOGIC or ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center mode is in the PHANTOM, the front speakers output the sound of the center speaker. q q If you connect an external amplifier to this unit, see if it has a built-in surround sound or ambience circuitry. If it does, then be sure that the surround or ambience circuitry on that amplifier is off while you are using the digital sound field processor's Dolby Pro Logic Surround decoding function. When this unit is in the Dolby Pro Logic Surround mode, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship with the center and rear channels may produce an unnatural effect. q Description of Dolby Pro Logic Surround DOLBY PRO LOGIC SURROUND: This unit employs the Dolby Pro Logic Surround system. This system is similar to professional Dolby Stereo decoders used in movie theaters. The Dolby Pro Logic Surround system, by employing a fourchannel system, divides the input signals into four levels: the left and right main channels, the center channel (to characterize dialogue), and the rear surround-sound channels (to characterize sound effects, background noise and other ambient noise). Dolby Surround is encoded on the sound track of commercially available video cassettes and video discs as well. [. . . ] 0. 2V Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Frequency Response (20 Hz ­ 20 kHz), YST selector: at CONVENTIONAL CD/TUNER/TAPE/LD·TV/VCR . . . . . . . . . . . . . . 0 ± 0. 5 dB FRONT IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 ± 0. 5 dB RIAA Equalization Deviation Phono MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]