User manual YAMAHA BLASTER-2000

[. . . ] This manual includes important safety information. It provides information about special techniques and skills necessary to ride your ATV. It also includes basic maintenance and inspection procedures. If you have any questions regarding the operation or maintenance of your ATV, please consult a Yamaha dealer. [. . . ] WHAT CAN HAPPEN You can come upon hidden rocks, bumps, or holes, without enough time to react. Could result in the ATV overturning or going out of control. HOW TO AVOID THE HAZARD Go slowly and be extra careful when operating on unfamiliar terrain. Always be alert to changing terrain conditions when operating the ATV. 7-18 qWARNING POTENTIAL HAZARD Failure to use extra care when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN Could cause loss of traction or vehicle control, which could result in an accident, including an overturn. HOW TO AVOID THE HAZARD Do not operate on excessively rough, slippery or loose terrain until you have learned and practiced the skills necessary to control the ATV on such terrain. Always be especially cautious on these kinds of terrain. 7-19 When riding in an area where you might not easily be seen, such as desert terrain, mount a caution flag on the ATV. DO NOT use the flag pole bracket as a trailer hitch. WHAT CAN HAPPEN You could be in a collision. HOW TO AVOID THE HAZARD Always mount a caution flag on the ATV to make you more visible. Do not ride in areas posted "no trespassing". Do not ride on private property without getting permission. qWARNING POTENTIAL HAZARD Operating in areas where you might not be seen by other off-road vehicles. 7-20 Select a large, flat area off-road to become familiar with your ATV. It could also cause engine or drive train damage. HOW TO AVOID THE HAZARD Make sure the engine has sufficiently slowed before shifting to a lower gear. 7-22 cC Do not shift gears without releasing the throttle. Damage to the engine or drive train may occur. When slowing down or stopping, release the throttle and apply the brakes smoothly and TURNING YOUR ATV To achieve maximum traction while riding offroad, the two rear wheels are mounted solidly on one axle and turn together at the same speed. Therefore, unless the wheel on the inside of the turn is allowed to slip or lose some traction, the ATV will resist turning. A special turning technique must be used to allow the ATV to make turns quickly and easily. It is essential that this skill be learned first at low speed. HOW TO AVOID THE HAZARD Always follow proper procedures for turning as described in this Owner's Manual. Practice turning at low speeds before attempting to turn at faster speeds. Do not turn at speeds too fast for your skills or the conditions. As you approach a curve, slow down and begin to turn the handlebars in the desired direction. As you do so, put your weight on the footboard to the outside of the turn (opposite your desired direction) and lean your upper body into the turn. [. . . ] Apply the brakes several times at slow speeds to let friction dry out the linings. 9 EBU00527 B. STORAGE Long term storage (60 days or more) of your machine will require some preventive procedures to guard against deterioration. After thoroughly cleaning the machine, prepare for storage as follows: 1. Fill the fuel tank with fresh fuel and add the specified amount of Yamaha Fuel Stabilizer and Conditioner or an equivalent product. [. . . ]