User manual YAMAHA BLASTER YFS200M

[. . . ] This manual includes important safety information. It provides information about special techniques and skills necessary to ride your machine. It also includes basic maintenance and inspection procedures. If you have any questions regarding the operation or maintenance of your machine, please consult a Yamaha dealer. [. . . ] Otherwise your feet may contact the rear wheels. qWARNING POTENTIAL HAZARD Removing hands from handlebars or feet from footboards during operation. WHAT CAN HAPPEN Removing even one hand or foot can reduce your ability to control the ATV or could cause you to lose your balance and fall off of the ATV. If you remove a foot from a footboard, your foot or leg may come into contact with the rear wheels, which could injure you or cause an accident. HOW TO AVOID THE HAZARD Always keep both hands on the handlebars and both feet on the footboards of your ATV during operation. 7-12 Avoid wheelies and jumping. You may lose control of the machine or overturn. qWARNING POTENTIAL HAZARD Attempting wheelies, jumps, and other stunts. WHAT CAN HAPPEN Increases the chance of an accident, including an overturn. HOW TO AVOID THE HAZARD Never attempt stunts, such as wheelies or jumps. Don't try to show off. 7-13 Modifications qWARNING POTENTIAL HAZARD Operating this ATV with improper modifications. WHAT CAN HAPPEN Improper installation of accessories or modification of this vehicle may cause changes in handling which in some situations could lead to an accident. HOW TO AVOID THE HAZARD Never modify this ATV through improper installation or use of accessories. All parts and accessories added to this vehicle should be genuine Yamaha or equivalent components designed for use on this ATV and should be installed and used according to instructions. DO NOT use the flag pole bracket as a trailer hitch. WHAT CAN HAPPEN You could be in a collision. HOW TO AVOID THE HAZARD Always mount a caution flag on the machine to make you more visible. Do not ride in areas posted "no trespassing". Do not ride on private property without getting permission. qWARNING POTENTIAL HAZARD Operating in areas where you might not be seen by other off-road vehicles. 7-20 Select a large, flat area off-road to become familiar with your ATV. Make sure that this area is free of obstacles and other riders. You should practice control of the throttle, brakes, shifting procedures, and turning techniques in this area before trying more difficult terrain. Always avoid riding on paved surfaces: the ATV is designed for off-road use only, and handling maneuvers are more difficult to perform on pavement. Set the parking brake and follow the instructions on page 6-1 to start the engine. Once it has warmed up you are ready to begin riding your ATV. As you get on the ATV, be sure not to accidentally move the shift pedal. Remember that the engine and exhaust pipe will be hot when riding and afterwards; do not allow skin or clothing to come in contact with these components. With the engine idling, pull the clutch lever to disengage the clutch and shift into 1st gear, and then release the parking brake. [. . . ] Clean the seat with a vinyl upholstery cleaner to keep the cover pliable and glossy. Automotive type wax may be applied to all painted and chrome plated surfaces. Many contain abrasives which may mar the paint or protective finish. When finished, start the engine and let it idle for several minutes. 9-2 qWARNING POTENTIAL HAZARD Operation with wet brakes after washing. [. . . ]