User manual YAMAHA C-65

[. . . ] Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. On the top of this unit, do not place: ­ Other components, as they may cause damage and/or discoloration on the surface of this unit. [. . . ] · In case of poor reception conditions, tune into the desired station manually (see page 51). · In case the signal strength is weakened by external interference while this unit is receiving the Radio Data System data, the reception may be cut off unexpectedly and ". . . WAIT" appears in the front panel display. · If the reception is cut off when the "CT" mode is selected, "CT WAIT" appears in the front panel display. 54 En FM tuning 1 Tune into the desired Radio Data System broadcasting station. We recommend automatic preset tuning to tune into the Radio Data System broadcasting stations (see page 52). Note The AUTO PS feature of this unit changes the frequency display to the "PS" mode if the Radio Data System station broadcasts the PS data. Program type Descriptions News Current affairs General information Sport Education Drama Culture Science Light entertainment Pop music Rock music Middle-of-the-road music Light classical Serious classical Other music NEWS AFFAIRS INFO SPORT EDUCATE DRAMA 2 Press DISPLAY repeatedly to select the desired Radio Data System display mode. DISPLAY CULTURE SCIENCE VARIED POP M ROCK M PS PTY RT CT M. O. R. M LIGHT M CLASSICS OTHER M Frequency display · Select "PS" to display the name of the Radio Data System program. · Select "PTY" to display the type of Radio Data System program. · Select "RT" to display the information on the Radio Data System program. · Select "CT" to display the current time. Note In the "RT" mode, this unit can scroll the display with a maximum of 64 alphanumeric characters, including the umlaut symbol. Unavailable characters are displayed with the "_" (underscore). BASIC OPERATION English 55 En ENJOYING SURROUND SOUND Enjoying surround sound You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. and Canada models only) + ­ DIGITAL Notes · When you select an input source (see page 47), the surround mode used for the previously selected input source is automatically selected. · If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is automatically selected. · If the surround modes are not available, "Prohibit" appears in the front panel display when you press SUR. · The surround modes are available: ­ when the beam mode is set to a setting other than the 2channel or 5-channel stereo playback (see page 62) and My Surround (see page 57). ­ when the CINEMA DSP programs are turned off (see page 69). ­ when the movie program is selected as the CINEMA DSP program (see page 68). In this case, only Dolby Pro Logic, Dolby Pro Logic II Movie, and DTS Neo:6 Cinema are available. ­ when 2-channel signals are being input. ­ when the Music Enhancer is turned off (see page 70). PL PL y · You can select an input mode (AUTO, DTS, or ANALOG) by pressing INPUTMODE repeatedly (see page 93). · Discs encoded in DTS-ES, Dolby Digital 5. 1 EX, Dolby Digital EX, or Dolby Digital Surround EX will be played back in DTS or Dolby Digital. Input channel indicators Depending on the channel component of the current digital input signal, the input channel indicators in the front panel display light up as follows: Status Indicator When 2-channel stereo signals are being input When 5. 1-channel signals are being input 58 En Enjoying surround sound Enjoying 2-channel sources in surround sound This unit can decode 2-channel sources for 5. 1-channel playback so that you can enjoy a variety of surround sound effects by switching the surround mode. y The surround modes are available only when the CINEMA DSP programs are turned off (see page 69) or when the movie program is selected as the CINEMA DSP program (see page 68). [. . . ] The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha's discretion, without any charge for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been discontinued or is considered uneconomic to repair. The original invoice or sales receipt (showing date of purchase, product code and dealer's name) MUST accompany the defective product, along with a statement detailing the fault. [. . . ]