User manual YAMAHA C70-2000

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] Refer to the following pages for details. ­ Checking the virtual surround effect. (Page 45) ­ Adjusting the volume balance. (Page 64) English 43 En AIR SURROUND XTREME Shifting the optimum listening area from side to side This function shifts the optimum listening area from side to side according to your listening position for the best Virtual Surround effect. Selecting the optimum distance between the speakers The surround effect will be changed depending on the speaker positions. You can set the optimum distance area to enjoy the best surround effect at your listening position. 32" NARROW 80cm (32") 42" The optimum listening area TOP MENU NORMAL 120cm (48") PRESET/CH MENU INFO. A-E/CAT. ENTER A-E/CAT. Over 42" WIDE SETUP RETURN DVD/ USB POSITION TV/ STB INPUT 1-4 AREA SOUND CODE SET DOCK TEST TOP MENU 200cm PRESET/CH MENU 1 Press POSITION to enter position mode. The current position appears in the front panel display. 2 Press / to shift the optimum listening area (L6, L5, L4, L3, L2, L1, CENTER, R1, R2, R3, R4, R5, R6). Adjust the optimum listening area from L1 to L6 when your listening position is to the left side of the center position, and adjust the optimum listening area from R1 to R6 when your listening position is to the right side of the center position. The position appears in the front panel display. INFO. A-E/CAT. ENTER A-E/CAT. SETUP RETURN DVD/ USB POSITION TV/ STB INPUT 1-4 AREA SOUND CODE SET DOCK TEST 1 Press AREA when the surround mode is activated. The mode switches to the area setting mode. The current setting appears in the front panel display. POSITION R3 AREA NORMAL 2 Use / to select one of the following area. MODE AUDIO DELAY ZOOM ON SCREEN Press ENHANCER. The ENHANCER indicator lights up in the front panel display when this function is turned on. Each time you press ENHANCER, the function is turned on and off alternately. The selected mode is stored in memory even when the system is in the standby mode. ­ The system memorizes the settings assigned to each input source. ­ When this function is on, night listening mode is automatically set to off. English 45 En LISTENING TO FM BROADCASTS Make sure that the FM antenna is connected to the subwoofer/system control when using the tuner You can use two tuning modes to tune into the desired FM station: Frequency tuning mode You can search or specify the frequency of the desired FM station automatically or manually. Preset tuning mode You can preset the desired FM stations in advance, and then recall the station by specifying the preset group and number. The AUTO indicator lights up when the system is set to automatic tuning mode. Lights up A FM 88. 9 MHz 3 Press PRESET/CH / once to begin automatic tuning. When the system is tuned to a station, the TUNED indicator lights up and the frequency of the received station is shown in the front panel display. Lights up Basic tuning operation C70-2000 WP87010 STANDBY/ON TV FUNC. MOVIE MUSIC STB 10KEY SPORTS GAME POWER A FM 89. 1 MHz Hint When you tune in an FM station using automatic tuning mode, the system receives the FM radio signal in stereo reception mode. The STEREO indicator appears in the front panel display. [. . . ] 9 STANDBY/ON, front panel . . . . . . . . . . . . . . . . . . 5 STANDBY/ON, remote control . . . . . . . . . . . . 9 station preset, FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 STEREO indicator, front panel display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]